V8 Swapped E30

[johnprusinski]

its going to be a while before I get this thing running and driving. I still have to find a trans and buy the cage for the car. after that I need to figure out a dash, plus a whole interior. I want to hopefully start it and figure out the bay before I paint it. I also have to reinforce the rear end so I don't rip out my diff. I still have a lot, but hopefully I can get it close to finished next year.

[CMart]

Nice. I'm doing a BMW V8 swap so not entirely the same, but if you have any questions or need a hand with anything shoot me a message. I'm over in Milwaukee.

Edit - I just sold a 102MM Fast intake/ported TB, but still have some ls6 injections/fuel rail if you are interested.

[johnprusinski]

Im going to go with an ls3 intake with rails and injectors. Surprisingly the swap is very straight forward, its just affording a trans and wiring that's the only thing that's presenting a problem, but its not too big of a problem.

I took off the intake and wiring harness tonight. I want to take it out to get some work done soon to make it quick and reliable.

[johnprusinski]

I took the time to try and fit the 6.0 in the car the other day. I day to pound out the trans tunnel with a hammer. the combination of beers and a hammer caused my trans tunnel to split and create a hole. I will fix that once I get more gas for the welder. right now it works as of right now, the motor fits in the car.

[johnprusinski]

well after a few months of dumping all my money into my VW and other E30, I didn't get anything done on the V8 swap. I tore it down and decided what im going to do for power. I cleaned it up, painted and installed the oil pan. I also ordered a couple gaskets and sensors  that I broke along the way.im also starting to buy the accessories for the front. 

im switching to LS1 accessories so i started by buying a LS1 crank pulley.

here is a basic idea of what the motor looks like now. i have the motor mounts back on it now.

i ordered a pedal assembly for the car so when that gets here i can start running lines.

[B C]

Is that oil pan made for e30 purposes or just generic ls swap into anything purposes

[Boris3]

Kind of reminds me of a Paul Poore SE30 pan

http://www.r3vlimited.com/board/showthread.php?t=368336

[CMart]

Nice progress. I picked up an Cheby V8 E30 recently. I'd love to check this out some time

[johnprusinski]

The oil pan is specifically built for LS bassed e30 swaps. I am currently prepping the cab for the cage by getting all of the tar out, which is not fun.

[Jdesign]

johnprusinski said:

The oil pan is specifically built for LS bassed e30 swaps. I am currently prepping the cab for the cage by getting all of the tar out, which is not fun.

Dry ice is your friend.

[johnprusinski]

I learned that the hard way. It wasn't hard to get the sound deadning out, it was the residue. I used aircraft remover and it worked great, but I should've used dry ice.

[B C]

why did you remove an aircraft from your car?

[wasnt m3]

What in 9/11 are you talking about, Snap?

[andyhundley]

Jet fuel cant melt sound deadening. #neverforget

[B C]

If removing sound deadening from your E30 causes your skin to fall off

youuuuu might be an aircraft.

[Jdesign]

I have a green car.

[johnprusinski]

Ha-ha I like where this is going.

[johnprusinski]

Time for an update. I short of maxed my credit card out to buy a perts to rebuild the head on the black e30 and a cage for the v8 swap. The cage has a pretty huge leed time so I probably won't see that for a few months. I did however get my garagistic brake booster delete bracket. I won't go into details about the scrap they sent me. I also bought my pedals and masters. On February 19th I'll be buying coilovers. I also mounted my resivoirs for the pedals. 

[B C]

What cam in the m20?

[johnprusinski]

I bought a 284 degree cam.