My name is Earl, and I have a Stainless Steel bolt fetish =)
-
And from the second picture you can see that removing that dust and keeping the paint nice will be a challenge=(Â
Get some form of a foam cannon to lift the dirt off before you hit it with a sponge.
-
And from the second picture you can see that removing that dust and keeping the paint nice will be a challenge=(Â
Hmmm....if only there was something you could cover the car with.
-
 Bay color really doesn't matter to me because I won't have it open for anyone to see unless there is a different motor ever. lol
if only you knew
-
your bay is so clean, you tucked the motor!
-
-
I don't have foglights anymore=) I've had foglight blanks. My headlights are plenty bright enough and foglights don't seem to last long before getting a rock through them=PÂ
#e36problems
-
Tackled a few things this weekend.Â
My passenger side door handle was hanging up on its frame like my drivers side so I removed it and remedied that.Â
I also removed the old Butyl tape from both doors. What a painstaking thing to do...
I also removed my brake pedal and added the oilite bronze bushings
The modified brake pedal went in after that as well.Â
I went to install the rabbit master cylinder so that I can bend up my front brake lines but I ran into an issue. The rear of the master fouls my firewall when it goes through my booster delete plate. I need to either remove some material from the firewall or source a porsche master that I know fits without any modification. I don't really want to take a dremel to the firewall but I may have to=/
-
-
Didn't realize it's been so long without an update. I have been doing little things here and there. Started on extending the wiring harness for the front (headlights, radiator sensors, etc.)
I also started installing all of the new rubber trim/mouldings that I ordered.Â
I ended up finding a diff cover without any broken fins and installed that yesterday. I painted it and installed new drain plugs while I was at it. I also got an Ireland Engineering rear diff mount instead of using the Silver Project one in my old cover.Â
I need to get new washers, a speed sensor bracket, and a diff mount bolt because they ended up getting corroded when I prepped my diff with the KBS BLAST for the KBS Rust Seal.Â
You can also see the passenger trailing arm paint was damaged when I installed the subframe. I sanded that down and primed it yesterday. I will be painting it again today.Â
I properly connected the door brakes and installed new boots/covers now too.Â
I also have some goodies that I have been waiting on coming so progress should pick back up=)Â
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login