My name is Earl, and I have a Stainless Steel bolt fetish =)

[Earl]

Repainted the brake shields on Friday

Also found why my diff wouldn't make a full rotation. I must have bent this trigger wheel when I pulled the flanges out and the assembly rested in the housing. 

I also attached the trailing arms to the subframe, bolted on the calipers/rotors, and bolted the diff in. 

Saturday I bolted the axles on

I then bent and installed the brake lines. I still need to get the clips to hold them tight to the trailing arms. 

Besides that Sam and I picked this up as a project for her  

[Earl]

I was finally able to apply KBS Rust Seal and then undercoat.

[B C]

What if a street surgeon was using your car as an operating table because it was so clean? Then what would you do?

[Earl]

I would question his idea of "clean"=) The car is covered in metal dust and saw dust currently=/

[Earl]

Got back down on four wheels

[B C]

Just from that top picture you can get an idea at the quality of the paint job. OE paint jobs definitely dont show reflections like that

[Earl]

And from the second picture you can see that removing that dust and keeping the paint nice will be a challenge=(

[JasonMason]

Earl said:

And from the second picture you can see that removing that dust and keeping the paint nice will be a challenge=( 

Get some form of a foam cannon to lift the dirt off before you hit it with a sponge.

[B C]

Would hitting it with really soapy water be the way to go? 

how much rage would there be if someone drew penises in the dust all over the car?

[REKIII]

Earl said:

And from the second picture you can see that removing that dust and keeping the paint nice will be a challenge=( 

Hmmm....if only there was something you could cover the car with.

[Earl]

REKIII said:

Hmmm....if only there was something you could cover the car with.

It was dusty when it arrived so I didn't want to put a cover over dust and compound the issue=(

[RamenNoobles]

Earl said:

 Bay color really doesn't matter to me because I won't have it open for anyone to see unless there is a different motor ever. lol

if only you knew

[Earl]

RamenNoobles said:

if only you knew

So young and naive=P lol

[RamenNoobles]

your bay is so clean, you tucked the motor!

[KaiserRolls]

"Engine tuck"

https://m.facebook.com/story.php?story_fbid=10155822409920112&id=305901075111&refsrc=http%3A%2F%2Fwww.google.com%2F&_rdr

[Earl]

Finally scored a foglight switch blank=) 

[REKIII]

Ho will you turn your foglights on?

[Earl]

I don't have foglights anymore=) I've had foglight blanks. My headlights are plenty bright enough and foglights don't seem to last long before getting a rock through them=P

[patsbimmer1]

Earl said:

I don't have foglights anymore=) I've had foglight blanks. My headlights are plenty bright enough and foglights don't seem to last long before getting a rock through them=P 

#e36problems

[REKIII]

but.......fog