The E46 M3 Journal
-
Step 1: Buy e36
Step 2: Remove engine from e36
Step 3: Remove S54 from e46
Step 4: Install S54 in e36
Step 5: Burnouts
-
.
But when they work, all these headaches are worth it.
This is too true.
I have had many instances where I have thought of getting out of the car-hobby all together from frustration of working on things and dwelling too much about the mountain of receipts that would exist if I didnt immediately throw them away.
When its back together and im driving, all is well in the world.
-
This has been in my living room for a month...
Not driving the M3 much due to the SMG pump loosing pressure (I think), just random beat runs around town which have been a blast. Waiting for time to install the new pump and coil overs.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Got the intake manifold off and starting disconnecting the "new" smg hydraulic lines... need to pick up an 11mm line wrench.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Ordered some goodies.
Sent from my SM-G935V using Tapatalk
Dunno if you have already but consider getting the reinforcements for the rear spring perch from rogue engineering. Can try garagistic at a lower price. http://www.rogueengineering.com/Rogue-Engineering-Rear-Spring-Perch-Reinforcement-E46_p_124.html
-
"New" SMG pump installed. Need to bleed and install intake manifold. Waiting until tomorrow to put the manifold on.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Front suspension installed as well as the Turner sway bar! Gonna need an alignment.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
So its probably going to handle pretty well or something
That's what all the Internets say...
I was able to get all this done today due to having my wife ( business partner) and associate outside with me. They had the laptops running and I was dictating emails and working on follow up for 7 hours. Between the 3 of us we got a ton done, be it work and bimmer!
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Slanging bolts
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
DrLeadFoot said:
Ordered some goodies.
Sent from my SM-G935V using Tapatalk
Dunno if you have already but consider getting the reinforcements for the rear spring perch from rogue engineering. Can try garagistic at a lower price. http://www.rogueengineering.com/Rogue-Engineering-Rear-Spring-Perch-Reinforcement-E46_p_124.html
Ordered
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
The great wonders of technology lol. Gonna start tracking this with the fresh suspension goodies?
Ehhhh. My track is the freeway, on & off ramps of South Eastern Wisconsin.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
This is almost as nerve-racking as doing a dyno.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Dyno is very frightening actually.
what are we going to do to celebrate the impending successful SMG repair?
SMG seems to be working perfectly!
Now chasing codes 174 and 175. Pre-cat O2 rich codes. After sitting all night it does not start on the first crank. Turn off key and retry and it starts. Leaky injectors?
I can't remember if I swapped over all injectors from the old motor or just the #6 injector.
Celebrate? Might buy me an engine stand!
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Chasing some issues. Corrected the no-start first crank issue by replacing the DME and injector relays. Not sure with one did the trick but it seems to like it and fires right up.
For the 175 & 174 codes I replaced the crank case breather. The light stayed off longer than normal (35 miles) then popped on after red lining 2 & 3rd.
What the heck!?
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Ordered this guy. This should fix it! #famouslastwords #donttellmeitisthevanos
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login