The E46 M3 Journal
-
Has this car ever had any rear subframe tearout/cracking issues?
The whole trunk ripped out and the diff was flexing all iver the place. Got it fixed and reinforced with turners weld in plates years ago. She should be bullet proof...
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Finally!
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Getting codes, 170, 177, 175, 174, 79. Posting for reference.
Going to clear them and see what happens.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
All codes are gone now. Put 50 miles on after I cleared them.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
All codes are gone now. Put 50 miles on after I cleared them.
Sent from my SM-G935V using Tapatalk
After doing a little research I think I should put a new salmon color relay in for the SMG.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Will you be making the picnic on saturday?
If work doesn't have me booked up I should be able to!
I have a sticker on the e46 that says my other car is an e30...
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
SMG is giving me some trouble. Also, chasing a vacuum leak somewhere as I'm getting a 174 error code.
Replaced SMG relay with two different new ones. Problem still exists. Once car gets hot, stop and go traffic/non-freeway driving, it slips into neutral and won't go back into gear.
Getting a low pressure code from the SMG. Thinking the pump can't keep up when it is warm.
My luck is seriously bad. I've been doing a good job on the good karma angle to life and still getting $#% * around by these damn bimmers.
But when they work, all these headaches are worth it.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Step 1: Buy e36
Step 2: Remove engine from e36
Step 3: Remove S54 from e46
Step 4: Install S54 in e36
Step 5: Burnouts
-
.
But when they work, all these headaches are worth it.
This is too true.
I have had many instances where I have thought of getting out of the car-hobby all together from frustration of working on things and dwelling too much about the mountain of receipts that would exist if I didnt immediately throw them away.
When its back together and im driving, all is well in the world.
-
This has been in my living room for a month...
Not driving the M3 much due to the SMG pump loosing pressure (I think), just random beat runs around town which have been a blast. Waiting for time to install the new pump and coil overs.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Got the intake manifold off and starting disconnecting the "new" smg hydraulic lines... need to pick up an 11mm line wrench.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Ordered some goodies.
Sent from my SM-G935V using Tapatalk
Dunno if you have already but consider getting the reinforcements for the rear spring perch from rogue engineering. Can try garagistic at a lower price. http://www.rogueengineering.com/Rogue-Engineering-Rear-Spring-Perch-Reinforcement-E46_p_124.html
-
"New" SMG pump installed. Need to bleed and install intake manifold. Waiting until tomorrow to put the manifold on.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Front suspension installed as well as the Turner sway bar! Gonna need an alignment.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
So its probably going to handle pretty well or something
That's what all the Internets say...
I was able to get all this done today due to having my wife ( business partner) and associate outside with me. They had the laptops running and I was dictating emails and working on follow up for 7 hours. Between the 3 of us we got a ton done, be it work and bimmer!
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login