Chapter GMW | E30 LS1 (starting on post #1427)
-
Who has re-keyed their locks? Please school me on this guys!
We (wilde toyota) take all of our lock and ignition cylinders to get recoded at Security Plus Locksmith on Loomis and I-43. The guy is old school and is very resonable and has roughly 1 day turn around time.
-
Say the downpipe is 3" O.D. and is 304 stainless, it would only grow 0.010" radially at 700F. Compound that with the expansion of the turbine housing, manifold, block, head, and strut brace and (without actually doing the calculations) you might be approaching 0.090" total expansion. I would suspect the engine is shifting back and forth on the engine mounts, yes even the solid mounts.
Make sure the rubber buffer #15 is installed. It slams up against the back of the subframe under braking so the engine mounts dont have to restrain the powertrain longitudinally all by themselves.
-
Say the downpipe is 3" O.D. and is 304 stainless, it would only grow 0.010" radially at 700F. Compound that with the expansion of the turbine housing, manifold, block, head, and strut brace and (without actually doing the calculations) you might be approaching 0.090" total expansion. I would suspect the engine is shifting back and forth on the engine mounts, yes even the solid mounts.
Make sure the rubber buffer #15 is installed. It slams up against the back of the subframe under braking so the engine mounts dont have to restrain the powertrain longitudinally all by themselves.
That was deep, breh!! Great info and thought process.
I don't think I've ever seen that bracket! You got to love previous owners.
Thanks for the info.
@DrLeadFoot
-
While waiting for parts to arrive.
Happy Thanksgiving!
@DrLeadFoot
-
do you shoot most of these with your phone?
because if so... damn.
-
do you shoot most of these with your phone?
because if so... damn.
Haha. The Samsung isn't that good. I got a canon t2i with an upgraded lens.
Looks fantastic!!!
Thanks!!
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
Got some new plugs.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
1500 miles on these plugs.
I got the new ones all pointed EXACTLY with the open end pointed away from the intake to help reduce spark blow out. Gapped exactly to .021 and yes I did double check! No breakup at all!! She good.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
1500 miles on these BOUGIES
I got the new ones all pointed exactly with the open end pointed away from the intake to help reduce spark blow out. Gapped exactly to .021 and yes I did double check! No breakup at all!! She good.
Sent from my SCH-I535 using Tapatalk
-
Snap hooked it up with his smoke tester and my system looks to be good with exception on my turbine housing. That is leaking very badly. I have a video of it on instagram @drleadfoot
@DrLeadFoot
-
O-ring bad I assume?
The turbo has 2100 miles on it. I hope it isn't going to blow them out that fast. High temp RTV sealant? Some guys have done this with good results from a brief google search.
@DrLeadFoot
-
glad to see you found/confirmed your leak. you must have been burning some low-grade leaves otherwise you wouldnt have needed the water spritzer.
You should see my garage. There are too many fire hazards to whip up a bonfire. I tried but I don't think I have any leaks except for the turbo cold side. (Video on instagram. Here soon.) Once my silicone dries up tomorrow I'll smoke the turbo side and see is she puff. #ifshesmokesshepokes
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
You should see my garage. There are too many fire hazards to whip up a bonfire. I tried but I don't think I have any leaks except for the turbo cold side.
-
Todd, TCD, came by the garage the other day and put my mind to ease about the leak. Everything is a-ok!
Now do I boost it up?!? What to do...what to do... If I do change the spring I'll out in a 20lbs one in there.
@DrLeadFoot
-
check the compressor map. I know absolutely nothing about turbos but, check the compressor map.
I think we are in the same boat.
Here is the map for my turbo. This is a foreign language for me. HELP!
@DrLeadFoot
M50) said:Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login