Skip to content
  • 0 Votes
    534 Posts
    66 Views
    JdesignJ
    I went a little backwards a few days ago and tore out most of the interior. I was hesitant but it kind of needed to be done sooner or later. I really want to pull the carpet, but that might be too far at this stage. The plan was to hunt down the factory speaker wires and remove them due to the car having premium sound, and upgrade to standard +/- speaker wire that all heads to the back seat of the car. I managed to remove everything needed and cleaned up unused wires for who knows what previously.  [image: RYHJ7618.JPG] I ordered a full Infiniti reference component set to replace all the speakers and tweeters. Man I had no idea the factory tweeter housings were so expensive for what they are ($150 a side!?) I carefully removed the old tweeter which was glued in really well and mocked up the new ones. Sadly as I was about to trim the housing my rotary tool died, so I ordered a new one and didn't get to finish last night. [image: IMG\_2113.JPG][image: BNEL7209.JPG][image: ERWV6669.JPG] I moved onto the head unit area which I think I mentioned before, but I will not be running a head unit, as my amp connects directly to my phone. So I ordered a single din storage tray/ dual cup holder combo to fit in its place. This was the only one I could find that I knew would fit and wasn't overly complicated. I wasn't please with the quality as it felt cheap and the trays pulled out loosely and uneven as there are no guides/ slides for the drawers. I fixed this by adding felt to the inside edges of the drawers which completely changed the feeling of them. This made such a huge difference. I also added some green felt inside the drawer to class it up a bit.  [image: IMG\_2081.JPG][image: IMG\_2083.JPG][image: IMG\_2085.JPG] That's all for now until I finish the tweeters and get the amp mounted. I plan on building an enclosure in the void between the rear seat and the trunk for a sub eventually, but for now this is a huge improvement.
  • 1 Votes
    580 Posts
    79 Views
    straight6pwrS
    ​
  • DIY floor mounted short shifter

    BMW Discussion trackdaybro dtm e36 e30
    6
    2 Votes
    6 Posts
    12 Views
    jc43089J
    I will be doing this for the van swap.  Much easier than trying to fabricate brackets to mount the carrier to.
  • SOLD. 17x7.5 Staggered wheels/tires 4x100

    Parts For Sale e30 e21
    2
    15
    0 Votes
    2 Posts
    5 Views
    timmerT
    Sold... thanks!
  • 6 Votes
    3 Posts
    15 Views
    S
    Awd 5spd wagon girl. said: I have a niche business called Krista's Custom Kreations. I make some pretty awesome shift boots. Made to order. Esy install. Check out my business on fb or Instagram :   @kcustomkreations Contact me via here, insta, or fb for inquiries.  [image: inCollage\_20190524\_121228183.jpg] Those are awesome! Do you do any other leather work? Like center consoles, glove boxes or door cards??
  • 0 Votes
    1 Posts
    2 Views
    N
    Hello all,  I have this car on Craigslist and I'm going to have the same info here. (Here's the link https://milwaukee.craigslist.org/cto/d/milwaukee-1987-bmw-e30-325imiles-needs/6787201504.html) Model: 1987 BMW 325i from California Not currently running as I have taken some parts off (Read below), read all text and look at photos. If interested email this listing and we can set up to see the car. To pick it up you'll need to tow or haul the car in its current state. Reason to sell: The car needs work and good TLC to get it running and I just don't have the passion for it right now. I love this car but it's not the right time for me to really care for it. My history with the car: I bought and daily drove it from October 2017-July 2018, I bought another car in July and haven't driven the E30 much since. It developed a vacuum leak that I've been trying to track down. I replaced many vacuum lines, filter and intake boot without finding the leak. I've since taken the throttle body and brake booster vacuum lines off and intended to replace those as they look original and were likely leaking. I tested the throttle position sensor for the proper resistance and continuity and it was in spec.  Specifications Engine: 6-Cylinders (BMW M20 Straight 6) 209,000 miles Transmission: 5-speed manual (Swapped from automatic two owners ago in California) Unknown miles on trans. Differential: 4.10:1 welded diff (Done by previous owner) Newer ratio, CD player w/AUX. Moon roof  Wheels & Tires Two sets of wheels/tires- Winter steel wheels & tires (1 season left on them) + original BMW bottle cap wheels in good shape with low tread. Trim & Interior: Four door, tan leather seats (Front seats are in poor but usable condition and rear are in excellent condition), power & central locks, power windows (Rear window switches are touchy and require multiple presses to operate), power mirrors, power moon roof. The plastic trim that goes under the steering wheel is gone.  Exterior: Some surface rust on the body panels (the worst one is pictured). No fog lights were on the car when I bought it. Rear bumper wasn't on the car when I bought it, I think I have the aluminum bumper but only 1 or 3 of the trim pieces that go around it. The body appears to have been re-painted in a few locations. What needs fixing: Vacuum leak makes the car not currently drivable. When you hit the gas the engine surges and revs constantly high. New tires needed soon and a new battery is likely needed also.  Work I've done: Replaced return power steering line and fluid, rear brake pads and rotors, air filter, washer fluid motor, fixed the gas/brake/clutch pedal box which cracked one day (common issue) by welding it and beefing it up with more metal, regular synthetic oil changes, flushed and replaced all the brake fluid. New exhaust from the down pipe back.  Other things to be aware of: Small oil leak under the engine (haven't found the source yet). Welded differential makes it challenging to turn at low speeds. The dash is cracked and the front seats have tears. Exhaust flex pipe leak. [image: 20190104\_145932.jpg] [image: 20190104\_145911.jpg] [image: 20190104\_145901.jpg] [image: 20190104\_145852.jpg] [image: 20190104\_145844.jpg] [image: 20190104\_145839.jpg] [image: 20190104\_145823.jpg] [image: 20190104\_145813.jpg] [image: 20190104\_145757.jpg] [image: 20190104\_145733.jpg] [image: 20190104\_145727.jpg]
  • Cracked dashboard

    Parts For Sale e30
    5
    10
    0 Votes
    5 Posts
    5 Views
    EarlE
    No dibs for me
  • 17” ACT 5-spoke wheels, 4x100

    Parts For Sale e30
    1
    9
    1 Votes
    1 Posts
    5 Views
    timmerT
    Set of 4 hard to find ACT 4x100 wheels wrapped in Kenda 215/40/17 tires. ACT was a supplier of high end OEM wheels and has since been bought by Ronal. Wheels are in great condition with no paint scratches or curb rash. Tires have plenty of tread left, but have some cupping typical of being on a car with negative camber...  Unfortunately, the center caps are long gone, and I don't even know wher to start looking for them I like the look of these wheels, but need the money to go towards my build, $450 obo.  -Thanks! [image: E94FA42A-4F54-4988-8D55-C062607C4C93.jpeg] [image: 4A7F4A6D-7339-4F7E-83AF-DEC5C2893083.jpeg] [image: 5E5758D1-5ACF-4E27-98DD-5658CC61FD25.jpeg] [image: FBF481B1-F6E0-463A-B164-E8E195781533.jpeg] [image: C9CEFB18-B875-4925-BF3A-24D92A621F80.jpeg]
  • ....and so it begins, project Turtle Farts.

    Members BMWs s52 e30
    101
    8
    5 Votes
    101 Posts
    41 Views
    YoungCRY
    Those look right at home
  • New guy with a little e30 318i

    New Member Introduction e30 318 3 series bmw
    21
    2
    3 Votes
    21 Posts
    19 Views
    SteelBlueS
    Get a load of this guy, running and driving E30... welcome
  • Alpine e30 progress/build thread

    Members BMWs e30 318is 5-lug m54
    821
    1 Votes
    821 Posts
    295 Views
    P_RoloffP
    Looks fantastic! We gotta get the cars out sometime together this summer, it’ll probably motivate me to buy new wheels to keep up
  • 3 Votes
    76 Posts
    24 Views
    V
    B C said: Picnic or bust!!! Totally COVID dependent, I was 100% in for the picnic prior to COVID.
  • Chapter GMW | E30 LS1 (starting on post #1427)

    Members BMWs pistons e30
    2k
    0 Votes
    2k Posts
    58 Views
    DrLeadFootD
    Did a track day at Blackhawk last year.  Could only keep it in 4th gear to keep the RPMs down so oil wouldn't blow out of my catch cans. Still clipped 120mph on the straight and had a blast! On newly mounted R888s all around.  Also, amassing parts! 🫣 Car is running great outside of a power steering leak. Removed the ABS pump.
  • 1 Votes
    32 Posts
    19 Views
    B
    Yes
  • Re-Wrap leather steering wheel?

    Services Offered/Wanted mtech e30 steering
    1
    0 Votes
    1 Posts
    3 Views
    B
    Anybody ever re-wrap a steering wheel? The leather is torn on the top of my e30s MTech wheel and I'd like to find someone to fix
  • E30 Battery Cable Terminal

    General Technical e30 battery cable
    19
    2
    0 Votes
    19 Posts
    27 Views
    straight6pwrS
    if you aren't completely happy, those post extenders i original shared are like $5 at advanced auto parts, saw them when I stopped in the other day.
  • **E30 Content** Too good not to share

    BMW Discussion e30 bmw e30 club drive
    5
    0 Votes
    5 Posts
    4 Views
    andyhundleyA
    I love M20 builds. I wish there were more around although the idea of a swap has crossed my mind a lot lately.
  • I did a thing!

    Members BMWs m20 vert e30
    26
    1 Votes
    26 Posts
    18 Views
    m42b32M
    straight6pwr said: that's sad, did you at least go cruising with the top down a couple times? Definitely a bummer since I really like the car and it has a ton of potential, I have been driving it quite a bit now that I got it running properly and will continue to do so till someone buys it! Drove up the lakefront with the top down on Friday and it was a lot of fun.
  • E30 brake issue

    General Technical e30 brakes squeal
    14
    0 Votes
    14 Posts
    12 Views
    EarlE
    Honestly you could rent all of that but I knew I would need it in the future and could help others do wheel bearings if need be=)
  • First E30

    New Member Introduction touring e30 wagon e30wagon 318i 318touring
    20
    1
    1 Votes
    20 Posts
    18 Views
    RamenNooblesR
    yeah it needs some work, and has had some rust repair already. I had been searching for months for any kind of wagon, saw a couple e30 tourings on ebay in florida that i really liked but didnt have time to make that kind of trip. also never found this car while looking, patsbimmer1 sent me a link and i knew i had to see it at least