E21 Project Thread - Part 2
-
I ordered 2 bmw pedal covers. Happy now?
Sent from my SM-G930R4 using Tapatalk
-
Hood is just about done with the rear roller modifications. Not perfect, but when are fiberglass parts a perfect fit anyways, right?
Sent from my SM-G930R4 using Tapatalk
-
Patience my friend. Body work is a winter project
Sent from my SM-G930R4 using Tapatalk
-
BRRRAAAAAAAAAAPP
2011 E92 M3 6MT ZCP - ESS 625 supercharged
2007 Z4MR
2003 E39 M5
2002 E46 M3
2021 X5 40i -
So I have decided on doing a high gloss vinyl wrap on the car instead of paying thousands for a paint job. I've been talking with a local vehicle wrap company (Diamond Graphics, LLC in Cedarburg) and one of the guys even dropped off a few color books at my house for me to look through. I have been jumping around with colors a lot since I am kind of indecisive when it comes to things like this. First was white, then I thought about an olive green or super dark green, but now I am more dead set on orange. Seeing this obviously helped...
Looking through the color sample books, here are the oranges that I found caught my eye the most. I know colors look different depending on what type of screen you are looking at them on and so forth, but what do you guys think. Looking for your opinions. I am leaning towards Arlon 4600LX-383 Gloss Bright Orange.
-
Have to see them on the car to make up your mind dude
-
That's the thing, holding up a 3" square sample piece still doesn't give you the right visual of what the entire car will look like anyways.
-
You can order enough to do a fender for probably like $60
-
Good call on orange. A shouty body kit calls for a shouty color.
-
#2
-
3M G14 gets my vote also
-
Thanks for your inputs
Sent from my SM-G930R4 using Tapatalk
-
So with the 2 aerocatch hood latches, the center nose of the hood still flapped up and down while driving highway speeds. Had to figure out how to secure it without using a third aerocatch latch. I found these mini hood button latches and figured to give one a shot. I wanted it discrete so I incorporated it into the roundel.
Test fit
Had to weld in a new support for it.
And bingo, it works
I also installed my euro smoked turn signal lenses and gave the grilles a coat of semi gloss paint for that black out look.
Sent from my SM-G930R4 using Tapatalk
-
I feel so accomplished for the smallest things today. Finally figured out why my tach wasn't working. All the threads I read on m20 swaps into e21 say to wire the ecu tach output to the e21 fuse box tach pin and it should work. Well not for me. I then learned that the e21 tach runs off a 12v pulse signal and the e30 ecu (or in my case megasquirt) sends a 5v sine wave signal to the e30 tach. Brian and a few others mentioned to run it straight off the ignition coil to test it. I did it while the ecu signal was still attached and all that did was prevent the car from starting. Removed the ecu signal and the tach works! Straight off the coil. So that's how I will be running it.
Also, my temp gauge wasn't working either. Retraced the harness I made to connect the e30 c101 connector to the e21 fuse box plug and sure enough, the temp gauge wire solder points came undone. Resoldered them back together, better this time, and that works great now too!
Now to just get the speedo to work with the vss when the new diff goes in. Paging Mike (hipmf)
Sent from my SM-G930R4 using Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login