'88 E30
-
Isn't that way more work than taping it off in the first place? [emoji14]
-
Isn't that way more work than taping it off in the first place? [emoji14]
Compared to taping off individual bolts a vent tube and a diff tag?
What was the oem color the bolts should be?
#showseason2018
-
Grab some SS bolts to replace them and done!
-
Good idea, but i don't care to buy bolts when the ones in there now work fine
-
Got all the bushings in
That's pretty much it
Found out I'll need to move the union a tad
-
well it happened, ordered about $1650 worth of crap tonight for it. (will get about $160 back in core)
Still remaining to buy:
coil overs
brake pads & fluid (still on the fence about pads)
front stainless brake lines
-
well it happened, ordered about $1650 worth of crap tonight for it. (will get about $160 back in core)
Still remaining to buy:
coil overs
brake pads & fluid (still on the fence about pads)
front stainless brake lines
Not sure if I asked/you answered, but any interest in my coilover setup or coilover/bbk setup
-
KaiserRolls said:
well it happened, ordered about $1650 worth of crap tonight for it. (will get about $160 back in core)
Still remaining to buy:
coil overs
brake pads & fluid (still on the fence about pads)
front stainless brake lines
Not sure if I asked/you answered, but any interest in my coilover setup or coilover/bbk setup
?????
-
What did you buy?
Inner/outer tierods
Boots
Clamps
Lock plates
Control arms
Wheel bearings
Wheel bearing circlips
Axle lock plates
Axle nuts
Wheel bearings
Brembo blanks
Calipers
Skid plate
ST sways
Akg sway bar mount reinforcement
Dust shields
-
KaiserRolls said:
well it happened, ordered about $1650 worth of crap tonight for it. (will get about $160 back in core)
Still remaining to buy:
coil overs
brake pads & fluid (still on the fence about pads)
front stainless brake lines
Not sure if I asked/you answered, but any interest in my coilover setup or coilover/bbk setup
I didn't even know you had stuff. Just bought brakes/calipers too.......
-
I've got a stance coilover/camber plate setup already welded up ready to bolt on. I also have a RX7 BBK that I could include.
Bad picture, but:
-
Do you know the spring rates?
I probably won't need the brake stuff as I've already ordered brakes/calipers
-
well it happened, ordered about $1650 worth of crap tonight for it. (will get about $160 back in core)
Still remaining to buy:
coil overs
brake pads & fluid (still on the fence about pads)
front stainless brake lines
That's some serious cash coming from the guy who didn't want to buy a radiator fan relay.
Keep up the good work!! -
Brake supplies are in! Just need to get some front stainless lines and pads/fluid
-
wheel bearings/lock rings, rack boots/clamps, rear sway bar mount reinforcements came today
getting closer
-
Got the new wheel bearings and hubs pressed into the trailing arms today.
Only things I'm waiting on is the skid plate & tierods (and the crap I haven't ordered yet)
Gonna hopefully convince myself to work on it tomorrow
-
This was more of a pain in the ass than I'd like to admit, especially by myself
Butttttt the rear sway bar is in. ST 19mm. Can't imagine doing that with all the subframe crap in the way
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login