96 328is Passenger Rear Brake Issue
-
Is it possible your dust shield is contacting the rotor and dragging on it? Are you getting more brake dust on that wheel than the other side?
I forgot to mention there is no noise when the car is on stands and I rotate the wheel. The dust shield has tons of clearance. There is also no extra dust which is odd.
-
You should probably run through what you have tried already lol.
-
Why would I do that? The issue never changed and everything else has besides the hardlines
So we don't mention shit you already tried
-
Maybe an early wheel bearing failure? Its possible to not have noise or noticeable play when rotating it on a stand, but under the weight of the car it could potentially make a faint noise and hitting the brakes could affect the sound.
Ooor, do you have access to one of those infrared thermometer things? You can use them to take the temperatures of each rotor after a long drive. One being hotter than the other would indicate dragging pads.
Just throwin' some ideas out there
-
I know you replaced the wheel bearings right? That's the only thing that's changed correct? If it was at a goofy angle, could the hub be cocked causing one side of the rotor to make contact with a pad?
-
Maybe it's the 17x11 wheels
Any debris in the shield?
-
shooting in the dark here, as it seems like you've eliminate almost everything to do with the brakes/rotor/ebrake/wheels/etc.
the dust plates on the rear diff inputs/outputs can make that noise if they start rubbing on the case or something becomes lodged in them. i guess braking could cause just enough driveline movement to make the sound increase?
Dan
-
Hm
100% positive the hub is in perfectly
-
shooting in the dark here, as it seems like you've eliminate almost everything to do with the brakes/rotor/ebrake/wheels/etc.
the dust plates on the rear diff inputs/outputs can make that noise if they start rubbing on the case or something becomes lodged in them. i guess braking could cause just enough driveline movement to make the sound increase?
I'll take a peek at that. I just find it odd that this happened the day I did RTABs but it has had nothing to do with anything I touched when I replaced them
-
well if you replaced rtabs, then the whole trailing arm could be slightly moved compared to before, what might this effect? axles/stubs/wheel bearings would be on that list.
Dan
-
-
Guide pins all lubed and crap?
-
Brand new caliper lol. Lubed to the T. Let's put it this way. From the hardlines to the caliper, there are no issues.
Just noticed if I lock my brakes up to stop, my caliper sticks pretty good until I start to move. Something isn't allowing the pressure to relieve normally.
-
-
Anything in the union? Maybe some crap in there?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login