1991 318is M62B44 Build
-
You wont want anything wider than 8" unless you plan on super stiff suspension and fender work or widening. 225/235 is pretty much maxed out which fit great on 8". It's much better to do a stickier 235 than going to 255.
Dan
-
You are on a 16 right?
225/45/16 is about the biggest you can fit up front with a roll
What are your wheel specs? Offsets etc.I am on 16x8 square, +20 with 225/45/16
-
From what I read, its hard to find ISO flares at parts stores to rent and when you can the dies are worn from improper/too much use.
I got that along with a cutter and bender.
I'll lend it out once I am done with it to anyone who needs it.
-
Making some progress on the booster relocation and waiting on some aluminum parts to get back from my welder.
Since I have not been able to find a good wiring diagram I have some general electronics questions.
From what I am gathering I need to take the main relay and fuel pump relay from the E39. Would these be located on the body harness or engine harness? There are a relays on the body harness and I am hoping those are it.
If they are fact are do I just need to tap into the E30 ignition wires so I can power them when I IG1, IG2, start, etc they are powered? Basically just wire them into the E30 key, and then into the fuel pump and the starter?
Any good write ups on general engine swaps and electronics for this?
-
Bad angle, but manifolds are already on there. Just need to weld up some down pipes and fit the old E39 exhaust. Decided to go straight pipe and forget the sleeper thing.
Ohh and the booster is from an older car and I am using that for mach up. I have one in much better condition that I will be using.
-
This build deserves its own get-together so we can take turns doing burnouts with it.
It's funny when I picture this car being done I don't picture it at the track (which is my new goal for the car), I picture myself in a parking lot with the throttle down choking on white smoke.
We'll have a BYOT (bring your own tires) party
In 4 exhaust pics
It's been a bitch so far. I need a lift or a hand to make any real progress, but I cleared my schedule for tonight to see what I can get done. All I have at this point is the exhaust manifolds made and my old E39 exhaust I plan on frankensteining. Driver side down pipe is proving to be a real pain in the ass.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login