'88 E30

[DrLeadFoot]

http://www.turnermotorsport.com/p-3794-e36-m3-clutch-flywheel-upgrade-package-for-e36-323325328.aspx

[DrLeadFoot]

I'll make the price right.

[Earl]

The ECS magnetic drain plugs are nice if people actually follow the torque spec. People usually put pan plugs in at NGA and that is why people were snapping them=/

[Bassboy3313]

Gotta have that supermoto in at least one pic, huh?

[KaiserRolls]

Bassboy3313 said:

Gotta have that supermoto in at least one pic, huh?

Haha. Yep. It's my room mates.

It'll get torn down before the snow melts too

[KaiserRolls]

Pics as of 20 minutes ago. It's crusty, but cleaning up alright

Most of the accessories are off

[Bassboy3313]

KaiserRolls said:

Haha. Yep. It's my room mates. It'll get torn down before the snow melts too

Looks like the Triumph will need to go under the knife as well, unfortunately.

[B C]

Kaiser is getting more work done than anyone else. this truly is the Apocalypse

[KaiserRolls]

About to go home and tear more crap apart

[DrLeadFoot]

Gonna need that oil pump nut soon.

[KaiserRolls]

Took more stuff off & worked off some of the crud.

And more junk came off

Had a metal water pump impeller. Neat

And a bmw oil filter

And some more pics

Popped off the oil filter housing

Cleaned more junks

That's about it, I still need to get the AC bracket off. But it's blocked

This is why I need four hands. Or. Friends.

Tomorrow I'll take more crap off and post more blurry pics

[KaiserRolls]

Just going earl mode for now until I pick up an impact and or grow a pair and pop the head off

So far I've just been using a wire brush and some simple green. I'll hit it with some powa toolz eventually

[HipMF]

poor mans impact: put ratchet on bolt. hit handle with big mallet.

always worked for me.

[KaiserRolls]

I don't want to just keep turning the crank though haha

[Earl]

I couldn't get my crank pulley bolt off at all. Kyle Kompas had to take it to his shop to heat it and zip it off with a pretty large impact haha

[DrLeadFoot]

I would get the flywheel lock pin. You can use it with the stock FW but not the one you're going to buy from me. Or use a screw driver. Or use a 2x4 and wedge it in the crank shaft.

Be sure to get a new bolt as these are strech bolts and only are good for one time only.

[KaiserRolls]

Good to know john.

There is no flywheel on the motor currently

[DrLeadFoot]

Saw that.

[Earl]

Won't fit with the engine on the stand either=/

[KaiserRolls]

No sir. Looks like 2x4 and impact will be the way it has to come off