'88 E30
-
What coils did you go with?
Sent from my SM-G900V using Tapatalk
@DrLeadFoot
-
What coils did you go with?
Sent from my SM-G900V using Tapatalk
BC, 10k front 12k rear
-
Tricked myself into working on my car for 5 minutes
Got the DS back together with a new CSB. (Old one was installed incorrectly) -don't believe the Internet about installing the CSB "backwards" they are offset and put an angle on the DS at the CSB. I took a bunch of pics for the next thread I see about installing these backwards when using a 24v swap DS.
Also drained the old diff fluid
Went to put new drain plugs in. And I don't have an Allen wrench in size massive. So I need to go pick up a new wrench tomorrow so I can tighten it and put the redline 75w-90 in
-
Put a bolt in it and a nut on the bolt, then use a socket to tighten it
or
i go get the right size allen wrench
-
It is a nifty idea. But I'm probably in the same boat as I don't have a bolt that exact size
-
So went to Sears and some other places. Nobody had an Allen that large. So I just bought a bolt and a few nuts. Gonna use the earl method.
-
A hex socket set would probably have the right size, you can buy the gear wrench set at Sears or Advance Auto.
Looked for those as well. No luck.
Bolt & nuts worked fine
Fluids in and plugs are tioght
-
New trans fluid is in. Went with redline MTL. also made a list which I immediately regretted. Pretty much ran out of cardboard.
-
Patiently waiting for coilovers to show up........
-
Coilovers are due to ship in about a week.
In the meantime I've been looking at buying new wheels/rubber. I have it narrowed down to 15x8 so I can run the bfg rivals 205/50/15. They seem to run bigger. Pics of them on 8s actually look relatively square which I'm happy about. Or the hankook rs-3 in 225/45/15. Both will fit and be relatively square and cost pretty much the same .
Trying to narrow down some wheels. They need to be 15x8, light, affordable and look okay. I'd also rather not run spacers but will if I have to
So far:
15x8
14.6 lbs
20mm offset
$109 each
15x8
20mm offset
13lbs
$138 each
15x8
20mm offset
13.5lbs
$109 each
Here's what the bfgs look like on 8s for example on the left
I will be selling my 15x7 k1s
I know they will probably work fine for me but I want something different and really want an 8" wheel for the future tire size changes
-
-
both those tires looked stretched to me....
That's why I said relatively square................................................
-
Tread width is 6.9" on a 205. 8" wheel. 100% not square, but relatively square compared to some of the crap that people run
This is why I'll probably go with a 225/45/15 rival. 7.9" tread width on an 8" wheel
-
I do prefer a slight "stretch"
I think the pictures above that you posted look fine to me.
I run a 225/45/16 on a 16x8, getatmebro
A friend has 225's on a 7" wheel and it looks a touch ballooned for my liking, for his car anyway.
I like starting new lines for every sentence.
Why do you live so far away -
The Kosei K8R are the clear winner for me. Other two are nice, but meh. I had K1s on my Miata and always wished they were wider. Debated buying those same C1s to replace them, but I'm glad I didn't. I love the way the K1s look.
Both tires look stretched in that picture. I would definitely get the 225 at minimum.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login