'88 E30
-
Pegasus... dangerous candy store to have so close by.
We have zero shops like that up here
-
Stud conversion and adjustable front endlinks are here. Brake pads, stainless lines, center support bearing, diff drain plugs, redline fluids are on their way.
Just ordered coils as well 10K/12K
-
Only thing left to show up are the coils
Pads/lines/CSB/diff plugs showed up today
As well as this gem front Blunttech
Also I lied, I have ate brake fluid&redline MTL showing up soon too. I was trolling craigslist in my area for shits and giggles and came across an ad for 2qts of redline 75w-90 and 2 gallons of BMW coolant. Guy wanted $50 for everything so I bought those as well-extra coolant isn't a bad thing to have on hand
-
That be a nice pile o parts rolls
Sent from my iPhone using Tapatalk
Jerf is back!
-
-
What coils did you go with?
Sent from my SM-G900V using Tapatalk
    @DrLeadFoot
-
What coils did you go with?
Sent from my SM-G900V using Tapatalk
BC, 10k front 12k rear
-
Tricked myself into working on my car for 5 minutes
Got the DS back together with a new CSB. (Old one was installed incorrectly) -don't believe the Internet about installing the CSB "backwards" they are offset and put an angle on the DS at the CSB. I took a bunch of pics for the next thread I see about installing these backwards when using a 24v swap DS.
Also drained the old diff fluid
Went to put new drain plugs in. And I don't have an Allen wrench in size massive. So I need to go pick up a new wrench tomorrow so I can tighten it and put the redline 75w-90 in
-
Put a bolt in it and a nut on the bolt, then use a socket to tighten it
or
i go get the right size allen wrench
-
It is a nifty idea. But I'm probably in the same boat as I don't have a bolt that exact size
-
So went to Sears and some other places. Nobody had an Allen that large. So I just bought a bolt and a few nuts. Gonna use the earl method.
-
A hex socket set would probably have the right size, you can buy the gear wrench set at Sears or Advance Auto.Â
Looked for those as well. No luck.
Bolt & nuts worked fine
Fluids in and plugs are tioght
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login