Chapter GMW | E30 LS1 (starting on post #1427)
-
Garage pic.
Wednesday I should be dropping off the car at the exhaust dude's shop. I might have him make me a catch can with 12AN fittings custom fit to the battery tray. After I get the CCV sorted I'll tackle the oil leak coming from the vanos cover(that's where I think it is at least).
Sent from my SCH-I535 using Tapatalk 2
@DrLeadFoot
-
http://www.wibimmers.com/board/index.php?/topic/1910-lmt-fall-dyno-days-october-4-6-2013/#entry28623
I have to get my CCV under control first before I try to put down da powa.
Sent from my SCH-I535 using Tapatalk 2
@DrLeadFoot
-
sweet mother of fuhhhhh!!!!!!
please get a video of it running with that "exhaust" on there
-
What wheels do i spy?
They are ESM 004. They were on the car when I bought it. My style 5s will be on soon. Polished lip, gold centers but what to do with the bolts?? Polish them or paint them gun metal? So many ideas, not enough time.
looks like ESMs
Do you have a wideband/ AFR gauge?
I have a PLX gauge but I need to get a new "brain". I fried mine.
sweet mother of fuhhhhh!!!!!!
please get a video of it running with that "exhaust" on there
It is a ton of fun! I don't know how to upload a video to the forum. I'll get one one on Instagram. Follow @drleadfoot.
I'm getting boost creap at 5000 rpms with a 5lbs spring. I think the manifold is flowing too well to maintain low boost. Up I go! 12-15lbs spring today.
I have 350 cop free miles on the car so far. At 500 I will change the oil and "try" to baby it to 1000. Probably will run 5w-30 Mobil, AMS or Royal Purple synthetic.
Sent from my SCH-I535 using Tapatalk 2
@DrLeadFoot
-
@DrLeadFoot
-
They are ESM 004. They were on the car when I bought it. My style 5s will be on soon. Polished lip, gold centers but what to do with the bolts?? Polish them or paint them gun metal? So many ideas, not enough time.
I have a PLX gauge but I need to get a new "brain". I fried mine.
It is a ton of fun! I don't know how to upload a video to the forum. I'll get one one on Instagram. Follow @drleadfoot.
I'm getting boost creap at 5000 rpms with a 5lbs spring. I think the manifold is flowing too well to maintain low boost. Up I go! 12-15lbs spring today.
I have 350 cop free miles on the car so far. At 500 I will change the oil and "try" to baby it to 1000. Probably will run 5w-30 Mobil, AMS or Royal Purple synthetic.
Sent from my SCH-I535 using Tapatalk 2
Oil argument starting now. Royal Purple HPS!! not the API stuff.
-
-
very very nice! That must be really exciting! The afrs look nice and stable/consistent too. What psi is this at?
Thanks!! You have no idea on how nervous I was!
The afrs were so rich most of the time they flat lined at the bottom. There is some tuning to do but TRM probably runs their tunes super rich due to lawsuits. I'll see what they have to say Monday. Or I might just put more boost on it!
I had a 15lbs spring in the waste gate. I'm going to run that until I sort out my high rpm issues.
Sent from my SCH-I535 using Tapatalk 2
@DrLeadFoot
-
very cool
cool to see all that hard work pay off eh?
-
very cool
cool to see all that hard work pay off eh?
It was a great day! I was almost turning green in the face when it was the moment of truth.
Sent from my SCH-I535 using Tapatalk 2
@DrLeadFoot
-
I gapped my plugs from .030 to .025. Hopefully this will help the cause. They all looked the same except for cylinder #1 which was a little oily. #ohgod
I'm guessing that it is due to a lack of CCV and pressure is building up at the front of the motor because the stock CCV is as big as a pencil.
I'm dropping off the car on Monday to get the exhaust work done.
Sent from my SCH-I535 using Tapatalk 2
@DrLeadFoot
-
I'm dropping off the car on Monday to get the exhaust work done.
Sent from my SCH-I535 using Tapatalk 2
nooooooo!!! hood exit needs to stay!!
Sent from my piece of shit laptop using the internet
-
nooooooo!!! hood exit needs to stay!!
Sent from my piece of shit laptop using the internet
LOL
-
I'm dropping off the car on Monday to get the exhaust work done.
Sent from my SCH-I535 using Tapatalk 2
nooooooo!!! hood exit needs to stay!!
Sent from my piece of shit laptop using the internet
nooooooo!!! hood exit needs to stay!!
Sent from my piece of shit laptop using the internet
LOL
Haha
Sent from my SCH-I535 using Tapatalk 2
@DrLeadFoot
-
Update:
The car is currently at the exhaust guys shop. Let the welding commence! I'm going 3" stainless all the way back to a straight through 3" in/out borla muffler. I'm getting a flex pipe welded into the downpipe along with 2 O2 sensor bungs and my one way valve for the CCV vacuum. V-band will connect the downpipe to the rest of the exhaust.
Once I get the car back I'm going to port and tap the valve cover for the CCV. Then we should be good!
As for the tune I'm in contact with TRM. I'm going to pressure test the system to be 100% sure I don't have any leaks then see what they can do to adjust the AFR.
Sent from my SCH-I535 using Tapatalk 2
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login