Hello. My name is Dan, and today I doomsday prepped

[GunMetalGrey]

KaiserRolls said:

If you have enough wiggle room in your fuel lines do what Ben said. Mine are too short so I usually get fed up and pull them in a fit of rage

Oh. Right. I changed to soft lines instead of those annoying metal ones that kept bugging me. 
My statement may no longer apply

[straight6pwr]

crisis temporarily averted. with some 3/4 hose and random fittings (whatever they had in stock) i was able to make a bypass section. see you all on saturday.

[B C]

Great news! Did you bleed it yet

[straight6pwr]

yup, actually very easy with losing coolant from only that section of the system. also took it for a 10 min drive up to operating temp, then parked it - not going to touch it till Saturday morning for fear something else goes wrong.

[Daggerty]

https://www.zoro.com/bars-leaks-cooling-system-repair-169-oz-1150/i/G5045984/?gclid=CjwKEAjwjPXIBRDhwICRg-DbgHISJADP6QXpYvfnB2epvSgTH9PaTkeA3Zi6Ps-JeJDErqu0P8sfghoCyqLw_wcB

https://m.advanceautoparts.com/p/design-engineering-quick-fix-self-adhering-tape-black-010491/10118101-p?c3ch=PLA&c3nid=10118101-P&iv_=__iv_p_1_a_214327102_g_12425515822_w_aud-496943010632:pla-298172165662_h_9018822_ii__d_m_v__n_g_x_pla_y_6201684_f_online_o_10118101-P_z_US_i_en_j_298172165662_s__vi__&utm_source=ACQ&utm_medium=cpc&utm_campaign=PLA&utm_content=shoppingcampaigns&gclid=CjwKEAjwjPXIBRDhwICRg-DbgHISJADP6QXpXlZslt1objhw53nxd4cC38C_2Mx81rPsRjz7zEofwRoCjyDw_wcB

[B C]

I keep that hose repair tape in my on-board tool kit. It saved me once when I was in high school.

[jc43089]

Snap said:

I keep that hose repair tape in my on-board tool kit. It saved me once when I was in high school.

I didn't know it could be used for that...

[B C]

On second thought, being DEI its probably for exhaust leaks and header cracks. I meant the radiator hose tape

[straight6pwr]

some sun came through friday night after washing the car. got out the camera to document the only moment when this car might be perfectly clean from here on out. (don't forget I am daily driving this car)

[m42b32]

straight6pwr said:

Amazing

[YoungCR]

Love the apex everything decal. Great shots and beautiful car!

[B C]

Wow, very nice shots! 2nd one is my favorite. We really need to take more nice photos with the group.

[KaiserRolls]

Those look good. Daily as not in the winter though.....

[suspenceful]

Beautiful E30!

[straight6pwr]

thanks, dudes!

Snap said:

Wow, very nice shots! 2nd one is my favorite. We really need to take more nice photos with the group.

i agree. wish it had not been raining saturday so the camera could have come out.

KaiserRolls said:

Those look good. Daily as not in the winter though.....

no, not if I can help it. but i also don't have indoor storage, so that doesn't help the cause.

[Jdesign]

straight6pwr said:

Came*** here just for this shot. Very very nice man!

[straight6pwr]

CABs switch to solid lollipops today, as well as a new shifter bushing.

having the passenger side CAB not resting on my exhaust reduced some cabin noise as expected. i still do have an odd rattle when starting from a stop in that same area that I thought would have been the exhaust, but it did not go away. *shrug*

also, first road trip with the car this weekend. time for some backroad blasting

[B C]

Last time I touched the control arms was 7 years ago. Did you need a tool to get the old bushings off/new ones on?

I definitely had to make a tool from threaded rod to get the bushings on the last time

Coincidentally I ordered some from Garigistic today

[KaiserRolls]

What engine mounts do you have dan?

[straight6pwr]

I was just barely able to get the old bushings pulled from the arms with a 3-jaw gear puller. They were already offset bushings so I had to use unequal length arms on the puller and drill a hole in the end of the control arm to keep the threaded rod from traveling off.

Engine mounts are r3vshift