'88 E30
-
They will have a weld-in license plate mount reinforcement soon. My license plate mounts tore out during some intense Togue races last month in Kyoto
Weld in butt plugs to stop the butt hurt
24v for life
-
Reinforcements are welded in
Most likely won't be doing the garagistic control arm reinforcements as it seems like massive overkill
Next up clean up the diff, por-15 everything
-
Are you talking a out the cross braces that make them like z3m trailing arms?
huh?
-
KaiserRolls said:
Reinforcements are welded in Most likely won't be doing the garagistic control arm reinforcements as it seems like massive overkill
I was commenting on this. I now realize that you meant the reinforcements for the front subframe=)
Ohhhhhhhh makes sense now.
Yeah, I most likely won't be doing them. It seems like a lot of heat to put into 28 year old 'not-that-thick' steel. I honestly have never heard of a subframe failing there either
-
Got out and cleaned everything up tonight. Also removed all of the bushings that were left (trailing arms and diff)
Also got the rear hardlines removed from the union. Here's the one that was semi crushed
And the other shitty one
Tore apart the struts I bought from Ray. If you ever want to watch a half inch socket/wrench fly across the room and dent drywall don't use a spring compressor. It was pretty awesome to see all the shit fly into the wall. The front struts are what I'll be using for my coil overs. They are actually super clean (pics show them as I bought them) the wheel bearings seem to be in great shape. I'll probably just toss them back on the car as is and if one goes I'll replace it then. Kind of a shitty thing is that I had to drill the stupid rotor set screw things out on both hubs, not a huge concern. Just annoying
That's where I left off for the night. I need to finish cleaning up under the car & start ordering some parts!
-
Gonna get out tonight (hopefully) and get some por-15 on the subframes and trailing arms and diff.
Also gonna try and finish cleaning up under the car.
Still not sure what I should put on the struts/knuckles. I'll have to see how the por-15 goes on elsewhere. Although I'll be waiting to get coils welded up before anything goes on them
-
I'm looking forward to seeing the coil build.
Sent from my SM-G900V using Tapatalk
@DrLeadFoot
-
Got my diff bushing today. I asked them to draw a trex brushing its teeth.
"Gangsta Rex don't got no long arms for his stank mouth"
I was not disappointed.
Also painting sway bars because I'm bored
-
Sways all dried and put in the trunk for now. Got the 1st coat of POR-15 on the front & rear subframe, rear trailing arms, subframe plates & lollipops. Will most likely put two more coats on everything eventually (still need to do the opposite sides of them)
-
Got everything coated in por-15
I will be top coating it with some enamel to get some areas and for more protection
Pics or it didn't happen
This stuff is a pain in the ass and I'm glad I'm done
Next step is ordering parts
-
-
Looks good! My front subframe and other stuff will be getting this treatment soon. What's up with the coil overs?
@DrLeadFoot
-
Got the topcoats on all the stuff today. Went with a gloss enamel. Put a shit load on it. Also under coated my car, it probably won't dry correctly. Also took the rack "apart"
It looked dicked at first, but it was fine after I cleaned it up. Added some grease on the teeth, took the ps block off back off, drained the crap, added more crap, worked the rack back and forth to get the excess out then put the delete plate back on
Getting the struts ready for coils.
Also whoever put the inner tierods in hulk-moded them. Vice grips + hammer + swearing and they barely came off. Lock plates were all farked by whoever installed them. It sucked
Also aligned my door and fender so it didn't look all borked
Also found some evidence of assholes in an air box(not my vehicle)...After I found acorns in my glovebox and kick panel.
Set a bunch of traps and left out some coolant for them. I hate rodents
-
Diff cover is now a color
-
Son, I am disappoint.
Didnt mask the hardware, diff tag, or the vent tube
I could sand it off maybe. I didn't clean up the hardware so it's not going to stick well anyways.
Couldn't read the diff tag either
Oh
And it'll be under the car
So
Eat
Shit
Snap
-
Isn't that way more work than taping it off in the first place? [emoji14]
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login