Chapter GMW | E30 LS1 (starting on post #1427)
-
Haha. Que the music!
Sent from my SM-G900V using Tapatalk
@DrLeadFoot
-
-
Coils are all wired up. I need to see if I need to run them to grounds coming from the harness or if I can just run them directly to the chassis ground. I'm leaning towards running the grounds to the harness.
I disconnected the grounds from the MS3 and Expansion board from the pins. I'll run these to the chassis ground for sure. I don't want to overload those pins.
I still feel like I'm winging it so please help with any input.
A wired up coil.
From DBurt86's build thread:
http://s314.photobucket.com/user/dburt86/media/coil%20driver_zpssqcdevwu.png.htmlAll sealed up.
@DrLeadFoot
-
This is what they are resting on when in the stock 413 red label ECU. I could use this as the heat sink and bolt it to the cover to dissipate the heat. What do you think?
__________________@DrLeadFoot
-
It's unloading in third
-
Snap is working his magic!!! #ceramiccoating #insideandout
Sent from my SM-G900V using Tapatalk
@DrLeadFoot
-
But...... #wheresthegold
-
With those chrome rims I need to be realistic and think about performance to make up for them...
Sent from my SM-G900V using Tapatalk
@DrLeadFoot
-
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login