'88 E30
-
That will cause a vacuum leak
Will it cause a big enough leak to be an issue? Not sure. -
That will cause a vacuum leak
Will it cause a big enough leak to be an issue? Not sure.
What will cause the leak? Running the lines to where they need to go?
Or capping off the ports on the smaller PCV nipple and the ICV nipple?
Or was that regarding the catch can for the larger line
-
Woah, triple post!
That would be with an atmosphere venting catch can on the large line with the small line hooked up to the connector behind the throttle body. -
So if both go to a catch can and the ICV nipple is capped. It will be good to go?
-
Yep!
May I inquire why you are venting the catch can to atmosphere instead of plugging it back into the intake boot? -
Yep!
May I inquire why you are venting the catch can to atmosphere instead of plugging it back into the intake boot?
I probably won't. I was just curious really.
I have some barbed connectors in a shopping cart waiting to be ordered.
-
Harness is now (kind of) on the s50
That's about it
-
Looking good
-
Is it done yet?
I'm at that point where all the parts I've ordered are currently installed. But now I have to make another order for more crap
-
Left to order:
Clutch/PP/FW
Slave cylinder
driveshaft
Giubo
O2 sensor
Random barbed connectors to bypass coolant lines to TB & to route the PCV line to the bimmerworld intake elbow
Vac line from fpr to intake manifold (may be able to reuse mine, unsure if long enough)
Figure out what to do with purge valve
I can either vent to atmosphere with that line from the tank, cap off the nipple on the TB and just keep the sensor connected to the purge valve (?? Will it throw a CEL) or just run the hose from the tank inline with the purge valve and plug it into the TB (essentially just bypass the charcoal canister thing) and keep harness plugged into purge valve.
If I do the second option I'm not sure if the purge valve still even works so it may just be better to vent to atmosphere.
No clue yet
-
Order the febi slave and guibo. What clutch did you decide on?
Haven't really decided
-
Just ordered:
Core support
Mishimoto radiator
Bimmerworld radiator hoses
Clutch/pp/fw (comes with release bearing, pilot bearing, hardware)
Slave cylinder
BMW coolant
Still to order:
98 m3 Driveshaft
E30 csb
Flex disc
O2 sensor
Trans fluid
Diff fluid
Shifter rebuild kit
Shit adds up quick
-
what clutch did you decide on?
and hey I gotta ask how much did you get your s50 for? I see s52's on car part for 1500$ and it makes it very tempting. an extra 1000$ nets me a good chunk of NA hp but I'm not sure if buying a very used s52 is a good idea ha.
sk8 or die
-
I went with the gripforce stage 2 clutch. Read some good reviews on bimmerforums of guys being skeptical, but they had good things to say. After I put it in and beat on it for a while I'll post my review as well. It's a cheap alternative at this point. If I have to tear it out in a year, lesson learned I spose.
I picked up the s50 with great compression, full harness, zf trans and DME (literally everything to swap) for $1450. Some stuff I won't be using cause I was already 24v. But now I have spares which is nice
-
Coolant, febi clutch slave, core support and radiator have showed up
-
removable core support using stock core support?
Yes sir
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login