Chapter GMW | E30 LS1 (starting on post #1427)
-
Old NGK 8 Plugs gapped to .021 Any input is greatly apprenticed.
#1 Leaky injector? This one is almost always wet.
#2 Notice the curled sides of the prong thing.
#3
#4
#5
#6
@DrLeadFoot
-
Stock evo 8 diff tabs bolt right to an e30 diff, found that out the other day.
No luck finding an e36 cover? -
The tough thing about the remote tuning is that they base their tweaks off of a formula which wont necessarily get you where you need to be on the first try, it may take several iterations. I could provide you with the same tweaks they do if I had a way to write to that chip. Thats just saying that theres not a whole lot of voodoo to it. Have you re-calibrated your wideband recently?
All you would need is a simple chip burner if they don't have any v
Popped in the new Spark plugs in the e30 gapped to .025
Still breaking up same as before. I need to get on the dyno and have TRM flash a new chip ASAP.
The old plugs were sketch. I'll get pictures soon.
I emailed [email protected] to inquire about this:
I need a different diff as the bearings are getting loud in the current 2.79lsd so I'm going through Wanganstyle Global for a new Diff. Here are some of his comments about what I'm going with:
Complete blueprinted 4 disc lsd unit with 2.79 final drive + standard Ramps produces max lock of 60%; you honestly don't need more- I'm pretty well known for high power differentials; I have a few locals at 500-700rwhp with street driven cars and 1200rwhp for drag.
So he recommends standard ramps for drag applications? I'm looking at building the exact same diff. And is he saying the 188mm diff with upgraded clutch discs is going to hold up to 1200rwhp? I thought past 700+ you needed a 210mm?
Sorry I'm just trying to build an absolutely bulletproof driveline.
sk8 or die
-
That would be a direct question for him as I know very little about diffs. https://www.facebook.com/globalwanganstyle?fref=ts
@DrLeadFoot
-
I've been emailing back and forth with TRM and they'll take 10% of fuel out of WOT. Hopefully that will tend to the breaking up issue enough to get some quality dyno pulls and go from there.
On the wideband it bounces around a little from totally bottomed out Rich to 10.5 when I'm at WOT. It is hard to see what rpm it is doing this at as I'm trying to hold on to this pissed off kraut rocket.
@DrLeadFoot
-
-
-
Update:
-Ordered a 2.79LSD with 4 clutch discs from Wanganstyle should be ready to ship in a little over a week.
-Received a central locking unit. Super anxious to install that!! If it works I'm going to flip my lid.
-TRM shipped me a new chip with 10% fuel taken out at WOT.
-Going to look into my #1 injector to see if it leaking or not spraying a mist.
-----
Which one has an engine light on??
The struggle...
@DrLeadFoot
-
-
Any chance you were in Oshkosh the other day in your M3? If not - your car has a clone up here rolling around...
Wasn't me. Someone needs to track this guy down!
Small update:
MY CENTRAL LOCK WORKS!!!!! Drivers, passenger and trunk keys operate the locks and gas cap. Yeehaw!!!
@DrLeadFoot
-
-
He photographed it on his engine, in a cool spot.
Who does that?!
-
I couldn't believe the engine bay shot. Haha
@DrLeadFoot
-
It's a farewell tour for the dif!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login