'88 E30
-
Just going earl mode for now until I pick up an impact and or grow a pair and pop the head off
So far I've just been using a wire brush and some simple green. I'll hit it with some powa toolz eventually
-
I don't want to just keep turning the crank though haha
-
I would get the flywheel lock pin. You can use it with the stock FW but not the one you're going to buy from me. Or use a screw driver. Or use a 2x4 and wedge it in the crank shaft.
Be sure to get a new bolt as these are strech bolts and only are good for one time only.
@DrLeadFoot
-
Good to know john.
There is no flywheel on the motor currently
-
-
No sir. Looks like 2x4 and impact will be the way it has to come off
-
I don't want to just keep turning the crank though haha
I've taken apart 3 M42s without an impact or anything to lock the crank/flywheel. The hammer/mallet only puts force on the the bolt for a fraction of a second. The inertia of the crank is enough to keep it from turning (much). I'm not saying it's the best way to do it, or even a good way, but it works.
-
I won't do the 2x4 thing, that would be ultimate mega last resort of all proportions. I'm just gonna hit the shit out of it with a hammer until something breaks or breaks loose
-
Any suggestions on where to send the head?
Also will hopefully be getting the crank bolt off tonight.
-
-
Like 800 with core exchange
-
I have the crank holding tool, the 24v jesus bolts are on crazy tight. I tried everything in my arsenal, and that was with it in the car lol. Torch didn't heat it enough, and I was concerned about the heat getting elsewhere. Blocked the rear wheels and tried it in gear, felt pretty harsh.
Long story short. I have the specific tool for the job now. Let me know if you want to borrow it. -
I have the crank holding tool, the 24v jesus bolts are on crazy tight. I tried everything in my arsenal, and that was with it in the car lol. Torch didn't heat it enough, and I was concerned about the heat getting elsewhere. Blocked the rear wheels and tried it in gear, felt pretty harsh.
Long story short. I have the specific tool for the job now. Let me know if you want to borrow it.
I have that tool too! Totally forgot. It doesn't work with my ATI Super Damper so I can sell it to you for half of what I paid.
@DrLeadFoot
-
^ Yup, worth it.
Makes it easy to do with 1 person and around 12 feet of breaker bar lol -
What is this tool for the jesus bolt? And what do you want for it leadfooter?
I was gonna try and throw an impact & heat at it tonight
-
Half of what pelican parts sells them for with tax.
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login