My name is Earl, and I have a Stainless Steel bolt fetish =)

[Derflaminflitzer]

56 pages and the car doesnt run....im starting to feel a bit let down earl.

[Earl]

Lol

[Derflaminflitzer]

If there is anything I can do to help speed this up without the cost of my money I will. Time is not money in this case

[KaiserRolls]

Earl said:

Lol

Lol

[StewCrew]

KaiserRolls said:

Lol

Lol

[StewCrew]

Earl said:

Lol

  

KaiserRolls said:

Lol

Lol

[RamRod E28]

hey stewcrew how did you get such a big pic on ur sig?

[KaiserRolls]

Ramze46 said:

hey stewcrew how did you get such a big pic on ur sig?

it's been there for forever

[Earl]

I made the purchase of a more period correct steering wheel yesterday=)

This means that my Grip Royal Grain with the horn button will be for sale shortly. 

Obviously it is in brand new shape since the car has never been driven with it and I bought it brand new. 

The new wheel is an Italvolanti that I found for an excellent price and it was one of the only wheels that I could find that I thought would flow well with the OEM+ vibe and is 350mm. 

I will post a pic once it arrives and is installed so that I can make sure it looks as fitting as I am hoping. 

Other than that I painted the proper side of my waterpump pulley last night since I painted the wrong side before=P 

Saturday should involve me installing my Ground Control RSMs, swaybar endlinks/bushings/brackets/hardware, and possibly starting to replace the wheel bearings.

[StewCrew]

Ramze46 said:

hey stewcrew how did you get such a big pic on ur sig?

I'm not sure hahah. I just went off the specs the website gave me for sizes!

[Earl]

I got my Ground Control rear shock mounts installed Saturday.

Here is the set of e46 m3 vert mounts that I replaced (less than a years worth of driving on them)

New versus old

Installed top plates

Then installed the shocks with the mounts

Also installed the new lower shock mounting bolts

After that I removed the rear sway bar to sandblast, repaint (not happy with how it looks from before), and then to prepare for the new bushings, brackets, end links, and hardware.

I noticed that the under side of my diff surface rusted through the rust reformer/paint and that my trailing arms are starting to do the same around the edges. I have been thinking of dropping the sub frame again to replace all of the bolts with new and this has me wanting to repaint it all again. I am not sure why said rust reformer would not have neutralized the rust like it looked like it had=/

[Earl]

After that I got the thermostat and housing installed with the gaskets, as well as the water pump pulley

The pile of scrap from the end of the day

After that I cruised up to Oshkosh for Collins BBQ=)

I now have an m44 crank pulley on the way and will have my new steering wheel and misc parts within the next month.

[B C]

Earl said:

After that I removed the rear sway bar to sandblast, repaint (not happy with how it looks from before), and then to prepare for the new bushings, brackets, end links, and hardware.

I noticed that the under side of my diff surface rusted through the rust reformer/paint and that my trailing arms are starting to do the same around the edges. I have been thinking of dropping the sub frame again to replace all of the bolts with new and this has me wanting to repaint it all again. I am not sure why said rust reformer would not have neutralized the rust like it looked like it had=/

also

I spy an engagement ring

[Earl]

This ring has been on my finger for almost four years. No engagement here=) 

.

Also, I don't want the diff and trailing arms to be rusty. Not sure how it even happened since it had rust reformer and was rustoleum paint.

[jc43089]

I would use some serious paint like KBS rustseal, it is very easy and looks good when done, I prefer the gloss black.  You can buy it on their website or Napa usually stocks it, at least mine does.  Rustoleum paint has not been very durable in my experience.

[Earl]

I was thinking about grabbing some of that for when I seal my front inner fenders=) I will have to look into it. It wouldn't take any more than 15 minutes to drop the subframe again and a day to redo the paint.

[jc43089]

It is very durable, I just brush it on, it self levels nicely to a nice smooth surface.

[Earl]

My m44 crank pulley showed up yesterday=)

I gave it a quick wash

Then I gave it a coat of paint

[Earl]

A while back I was working on getting some vinyl cut to make my custom "Touring International" badges. A guy on Instagram saw my idea and told me he could make me a set of badges from lexan. He told me that he made a "BMW Compact" set by hand painting it from the back side and painting black over the top. I asked how much he wanted to do them and said he would make my "Touring International" badges and send two "BMW Compact" badges to me for free. I was excited. He never sent me any teaser pics but he mailed them from Europe around a month and a half ago. I was excited for them but lost hope because we both thought they got lost in shipping. The mailman came yesterday and dropped them off and I couldn't wait to open them. 

They turned out amazing. I thought he simply hand painted them from the back but it is much more than that. He actually machined the letters out from the back and then painted them in. This makes them 3D just like the OEM badges. I will take pictures of the backs when I get home and also some of the "BMW Compact" badges.

[B C]

That is very cool!