Chapter GMW | E30 LS1 (starting on post #1427)
-
AFRs are nice and smooth, assuming the dyno doesnt have a crazy smoothing factor in place.
Do you have a compressor map for your turbo? otherwise what are the specs and I will try to find one
I have one a couple of pages back.
440whp? Yea I would be a bit disappointed. Use a wastegate spring that's the lowest boost you want and use an electric boost controller on top of that for mad boostages. Aren't you running a 40r? Man I'm not that impressed. Turn up the boost and wake it up! You aren't even getting into the good part
This thing is a beast and I can't wait to see it in person!I will turn it up for sure. I might wait until this weather warms up. There are times that I spin in 5th gear with the cold and salt on the road.
@DrLeadFoot
-
I'm not too good with dyno charts yet but aren't the HP and Torque lines supposed to intersect at a consistent spot at a lower rpm?
@DrLeadFoot
-
I guess the computer auto-scales the graph to make it more "readable".
@DrLeadFoot
-
It's cold out there, son!
Thanks, Snap! Maybe next winter I'll upgrade the fuel system and go megasquirt. I'll be calling you hourly when I cross that bridge.
@DrLeadFoot
-
I'll wrap this day up with a couple of words:
From my last dyno run to today I basically got my sparkplugs right, added a full 3in exhaust, fixed a couple vacuum leaks and added CCV. I thought the vacuum leaks would hinder HP more than it did or maybe the exhaust is way more restrictive now than it was coming straight out of the hood. In the end I'm in a good spot with only more to gain. Now who wants to pull out my wastegate for me??
@DrLeadFoot
-
-
This thing is sweet as gold shoes!
-
It just loaded for me... But in post 443. That second pic of the front of the car. Is too freakin' cool.
-
-
List of things I need.
-Fuel pressure regulator adapter for a M50.
-PLX Devices power plug for the wideband.
-Bigger I.D. vacuum line for my wastegate and the fittings to go with it.
The vacuum line should raise the boost up but I don't want to do that until I get my wideband working (again). Then I can dial it in with the FPR.
I'm also going to have Kummrow fix my oil leak. Messed my arm up and wrenching probably shouldn't be happening.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
List of things I need.
-Fuel pressure regulator adapter for a M50.
-PLX Devices power plug for the wideband.
-Bigger I.D. vacuum line for my wastegate and the fittings to go with it.
The vacuum line should raise the boost up but I don't want to do that until I get my wideband working (again). Then I can dial it in with the FPR.
I'm also going to have Kummrow fix my oil leak. Messed my arm up and wrenching probably shouldn't be happening.
Sent from my SCH-I535 using Tapatalk
We got ourselves another earl ladies and gents
1984 BMW 528e - SETA and manual swapped! M50 to come!!!
1988 BMW 528e - Need parts?
1991 Chevy C1500 (mighty 350 with TBI and Wisconsin weight reduction package)
1996 Mazda Miata (SOLD!!!)
1996 BMW 325i (Donor car)
1998 Chevrolet Corvette (BEAST)
2001 Jeep Grand Cherokee (BROKEN)
-
Ordered the PLX power cord. Waiting for I.E. to call me back with a price for the M5X/S5X fuel rail plug and will be ordering that today.
Also got this coming http://www.crutchfield.com/p_500HD149BT/Alpine-CDE-HD149BT.html?tp=5684
Let the Alpine BLAST!
@DrLeadFoot
-
Ordered the PLX power cord. Waiting for I.E. to call me back with a price for the M5X/S5X fuel rail plug and will be ordering that today.
Also got this coming http://www.crutchfield.com/p_500HD149BT/Alpine-CDE-HD149BT.html?tp=5684
Let the Alpine BLAST!
Nice, I like Alpine stuff, my truck has an Alpine CD player from 1995 that still works great.
-
Fuel pressure regulator adapter kit for the S52 has been ordered.
@DrLeadFoot
-
Your valve cover is powder coated right? Is the underside coated as well? I am getting mine done, and plan on leaving the studs and little screws in and just getting new ones afterwards so that they will keep the coating out of the threads. Just curious how you did it.
-
Your valve cover is powder coated right? Is the underside coated as well? I am getting mine done, and plan on leaving the studs and little screws in and just getting new ones afterwards so that they will keep the coating out of the threads. Just curious how you did it.
I ordered it from Renewed Finishes in Cali. Not sure what he did with bolts. The underside is bare metal.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login