WIBIMMERS

Please let me know if you have a door moulding for driver left. 9203794405

M318 said: Looking for AWD BMW with m54. In the spring we are going to be selling our x3 3.0 6speed. But I assume you are looking for something RIGHT NOW.

Post up some pics!

i just submitted requests for approval for a few track days to the calendar

So you own/run the shop without knowing how to work on vehicles yourself? Not saying it's a bad thing. But why did you only have one mechanic since you stated you have all this work? What's your labor rate?

That is the thing... were just waiting on the date.

CYoung said: Well there isn't much going on for track and car meets this time of year... Your always welcome to add your own event! Which he should seriously do. Mitch I think next summer you gotta have a bmw meet at the shop!

494.80 labor for 2008 135i I would want to shop around for the clutch kit.

Can you do motorcycles?

i have stamping dies for shims if someone needs them just let me know what sizes you need

How's this coming?  You should pick these up.  http://www.wibimmers.com/board/index.php?/topic/2108-e36-m3-suspension/ Pretty sure that car has Oreilly's shocks in front but I could be wrong.

This one. http://www.wibimmers.com/board/index.php?/topic/2087-97-m3-sedan-whole-car-rear-hit/#entry30867

It looks better as thumbnail...

Snap said: Earl said: Not many of us use it. We usually use INSTAGRAM. FILTER ALL THE THINGS

I have the centered hole m3 ones, I took them to my neighbor's auto shop, he knocked the old ones out with the air chisel and put the new ones in with a bottle jack type of press.  My wife makes them a batch of cookies and we are even lol. I cut the rubber out with a box cutter. [image: MIAHELPING015\_zps4a72662c.jpg]

Ive done an e30 c101 round engine connector to early model square e30 body harness for a 2.7i setup. Do you plan on making an adapter or modifying the stock harness? Send me a pm.

Another bmy collection:)

Oh, I am still using stock tune.  Is the UUC one worse than others?  I think a bigger issue is the super smart folks replacing the harmonic balancer with a under drive pulley.  I'm sure the flywheel is important but the harmonic balancer is what keeps the crank in one piece.

I'd be down for Oshkosh!

Nice "beater."