Looking to rent RTAB tool
-
For an e36? The sleeves are aluminum so they come out fairly easily with a few drilled holes and some light Dremel work. If you're replacing with Poly you can usually grease them up and draw them in with a clamp
Oh, I thought they were steel. I've seen people drill them out but I was thinking that it seemed horrible. I just don't want to cut into the trailing arm on accident
-
Oh, I thought they were steel. I've seen people drill them out but I was thinking that it seemed horrible. I just don't want to cut into the trailing arm on accident
I did mine caveman style and uses the drill bit to "saw" through the sleeve and it didn't hurt the arm at all. Just one of those things that you can do carefully. If you drill out enough rubber, you could also use a hammer and chisel to split the sleeve.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login