My name is Earl, and I have a Stainless Steel bolt fetish =)
-
I did some small things yesterday.
First, I ordered my tires. I opted for Hankook HR2's. I see that they have a pretty soft sidewall so they should stretch easily. I'm going for 205/40's in the front and 215/40's out back. I got them for $350 shipped to my door.
I also found out that the lips are in stock and I am placing my order asap. These wheels will be together way faster than I had thought.
I've been contemplating making a set of all red tails. I then remembered that I am getting a NOS set of amber tails. I figured since my current tails have some minor spider cracking, why not hit them with some model paint? So I did. I used Testors 1605 Candy Apple Red paint with Testors clear. They turned out really well. I just need to wetsand and buff them.
Started off by masking them off:
I then layed a nice even coat of red. Somehow it only took me one coat to achieve the color that I needed, and I had no runs.
I removed the tape on this one to ensure that it matched well. I also wanted to compare a before and after.
It looks slightly off in the pictures due to it being a more matte finish at the moment, and I couldn't get a heads on shot.
I then taped up the second light to be able to shoot color and clear right after one another.
Then I just buried them in clear with a heavy coat. I wanted to put enough on to make a nice thick layer, but have no runs. It worked out really well.
I'm going to let them dry for a day or two, and then do the wet sanding and buffing.
Hopefully I'll get something done at the shop tonight too. I can't think of much to do without a wire wheels for the bay, and any of my rear subframe or paint. haha I'll update again tomorrow.
-
should have left the reverse light panel white. Looks 10x cleaner.
 But they look good man. I wanna do this to the E28 eventually.NoÂ
 ....I kid ... I really like the factory tails on the e28 though... .
-
Those all red e28 lights look sweet! Theres so much red tail light tinting going on around here, I love it! You're are lookin top-notch sir.
Thanks good buddy. Hopefully more so after Saturday.
I didn't go out to the shop yesterday because I couldn't figure out what I would do. I instead went home and finished the headlights. I also got the tail lights almost finished. They just need to be wet sanded and buffed=) I didn't get any pictures of the other head light finished, but I did get a picture of the tail lights.
Updates will follow Saturday.
-
Waiting for Jake to wake so that we can do some painting:P I'm going to nap in my car until he comes.
Are you going to paint anything that differentiates power, white?
-
I got a little done Saturday.
I started the day by tearing into my motor a little more. I removed the upper timing cover and water pump. I tried extracting the water pump using two bolts to push it out, but ended up braking the ears off. Then I just shook the crap out of it until it popped out.
Then I got working on my rear subframe yet again.
The hardest thing was getting the handbrake cable ends out of the trailing arms. They were basically fused together. I used a pneumatic chisel on one, and had to drill the other one out. I didn't get any pictures. I then degreased everything, washed it, and dried it with an air nozzle. I then threw down a coat of Rust Reformer to try and prevent rust in the future. (These pictures turned out horrible)
Then shenanigans ensued and come skating was done. I managed to snap the tail off of my board and continued to rid it until I snapped the nose off. Then I focused it.
I then finally got actual paint on the parts. The diff, hubs, and dust shield will be black. I did not have any black at the time. I will also be clear coating it all. The color is a champagne tinted silver. The picture of the subframe is the most accurate portrayal of the color.
Wednesday I will be pulling the head off of the motor and taking it to get resurfaced. The flywheel will be getting done too. I need to start ording a lot of parts. I need a ton of little things for the motor, as well as brake lines for the rear.
-
i like how that subframe turned out. it looks really good.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login