Calypsorot '90 325i Coupe
-
Forgot to update.
Sunday we connected the steering column, and while attaching the driveshaft we impromptu decided to do shifter bushings while we were under there.
Still trying to figure out the fuel leak. Chris suspects its the fuel rail, which we have a spare so we'll swap it in next time and see what that does.
Other than that leak, just needs the interior put together before it's in a good state.
Considering I wasn't a licensed driver when this car was obtained, it should be nice being finally able to drive this thing for once while I work on the alpine swap. Funny that it all came together exactly a year after we dropped in the new motor
-
did you do the trans selector when you were in there? tough to do with it still on the car?
Dan
-
did you do the trans selector when you were in there? tough to do with it still on the car?
we did just bushings and washers (garagistic delrin carrier shifter + rear) and that alone made a huge difference considering how sloppy it was. if we had more time it could've been done possibly but it took quite a bit to get it all in because the bushings were seriously rotted. lots of torching
but the good news is i'll have all new hardware on my alpine since it's a manual swap, and chris sourced me a z3 shifter for that guy. (i REALLY should make a build thread for that soon)
-
did you do the trans selector when you were in there? tough to do with it still on the car?
Couldn't remember if I did it or not when we swapped this motor/trans in but it didn't feel sloppy. I've done them in the car before, it isn't too bad.
-
the calypso has risen. and promptly fallen back down
we did this quick test drive last week after fixing a fuel leak (o ring in the fpr was forked), but i took the rear subframe apart to swap in the poly bushings i picked up last year. currently working on getting those swapped in.
after that it should just be interior. it seems to be running pretty solid.
-
So for a second there were 2 running/driving M20s in the state. Now its just Mr. Hundley again. Its nice to see progress on the Young BMW fleet nonetheless
AFAIK my sedan is the only one in the Madison area. I believe there are two coupes downtown but they're relatively stock. I'm of the belief that the calypso should be kept as stock as possible visually, it wasn't meant for the works with is lips and skirts
-
Didn't have time to update until now!
The bushing swap finally happened, and we also ran brand new nickel brake lines while the subframe was dropped (we literally tried EVERY method, and ultimately ended up dropping the whole thing.)
Also got the interior back together Friday night for the picnic. Carpet still needs a little cleaning, but I did do some carpet cleaning a while ago and it cleaned up real nice.
The first test drive with everything back together ran great! We made it to Waukesha without a hitch.
Next on the list is fixing the minor lower coolant hose leak, speedo sensor in the diff, odo gears, obc clock swap (current obc screen is smashed), and looking into the bumper. I have a brand new bumper in green/teal, just gotta see how it mounts up and then i'll look into getting it painted.
-
Look at you driving a running e30 on wibimmers. That's a small club to be in! Congrats!
-
Look at you driving a running e30 on wibimmers. That's a small club to be in! Congrats!
Pat.
Eat crap
-
Look at you driving a running e30 on wibimmers. That's a small club to be in! Congrats!
there were 5 wibimmers e30s on Saturday. That means we're batting over .500, which in baseball if freakin amazing. But baseball sucks, so, bad analogy. BUT STILL.
good job getting the car out there, Matt, and nice to finally meet you.
Dan
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login