1991 318is M62B44 Build
-
ECU was sent to the wrong address so I am battling that right now. Also, the engine harness I was sent was not the one I purchased so that is fun.
Definitely frustrating when I have the motivation, but not the parts.
Anyone know of any good painters that do work on the side? Looking to get some IS skirts and get a paint job over the winter.
-
Also need to title the car still.
Anyone have experience with registering as a collector/classic?
Thinking about "V 80 30" for the plate.
I'm pretty sure if you title as a collector/classic/hobbyist that you don't get to pick what the plate says. I was looking into hobbyist plates for my e21.
-
-
Hobby/collector plates are just a number in wi based off your collector Id. Dmv page has all the details.
This is correct unfortunately, they just assign you a number. I believe you are also not allowed to drive a car with collector plates in January. Registration used to be a one time fee and then good forever but I don't think that's the case anymore
-
Pay registration once and that's it
Only pay to transfer it to a different car
-
Yes it's $200 for first time and there is a specific dmv form to get a temp plate for collector cars in January do year round isnt an issue. As Kaiser said plates are good forever until a transfer is needed.
http://wisconsindot.gov/Pages/dmv/vehicles/title-plates/collector-plates.aspx
http://wisconsindot.gov/Pages/dmv/vehicles/title-plates/pp-faq.aspx
-
If you plan on putting on fender flares and things like that you will need to get hobbyist plates, antique/collector plates require that the vehicle is fairly original in appearance.
Also I was wrong about the perminant registration, I had heard they were getting rid of it
-
Hoping for some help from the community.
All my mechanical is done. Driveshaft, booster, brakes, clutch, etc. I am stuck on the wiring. Here is my current setup.
1997 M62 OBDII engine harness
Tuned 88 pin 1997 540i ECU with EWS delete
1998 non-vanos motor
I am getting voltage to the dme since it is hard wired, but not sure if the DME power is hooked up. Anyone who has done another motor swap with any input?
Here is labeled C101, 2 relayed on the engine harness, white plug off the harness and DME (not plugged in).
I've got power and ground to everything (sloppy for now)
This is where I am confused. I know the black wire leads to my starter, but what about the rest?
I can get the starter to engage by hooking up 12v to it, I can get the fuel pump going. When I crank it with fuel pressure it doesn't fire up.
What am I missing?
For the record here is the C101 and DME pinout for this setup:
Any help would be greatly appreciated. I would love to get this thing running before winter hits.
-
Injector rails grounded? Getting fuel/spark?
-
garagistic has a little chart on m62 wiring: http://garagistic.com/index.php?page=e30-m60-wiring
i can't find any wiring diagrams online to identify that white 12-pin connector.
Dan
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login