UUC DSSR?

[REKIII]

A potential bad thing about it being adjustable is the fact that it transfers rotational force.  Any adjustment would be rotational (threaded rods, jam nuts, etc).  Therefore this adjustment could potentionally loosen and cause failure, or at a minumum horrible perfromance.

Yes, if it's thightened, you should be fine, however it is just a bad idea on a part like that.

[B C]

Yes, Robert is right, this occurred to me last night and now am against the idea of that kind of adjustability. 

It would really suck to not be able to get into 1st and 2nd gear all of the sudden.

[Rowleym]

I agree with that as well.. Are all the other dimensions the same except center to center?

[B C]

I dont think so. I believe the centering of the slot on the selector shaft input may be offset or different widths on some of them.

[GunMetalGrey]

I am already in the works of making these, I have yokes for the G260 and ZF trans, and E36 M3 shifter, and have lengths and twists worked out. The yokes have been made, and just waiting to weld them up.

[jc43089]

GunMetalGrey said:

I am already in the works of making these, I have yokes for the G260 and ZF trans, and E36 M3 shifter, and have lengths and twists worked out. The yokes have been made, and just waiting to weld them up.

Cool, I will be in for one for my e30.  As long as it is cheaper than the UUC.

[Earl]

I am in for one as well=)

[GunMetalGrey]

Of course it would be cheaper! Why else would I bother making them? 

[Rowleym]

Ill take one unwelded!!!

[wasnt m3]

What kind of price we talking Ben?

[GunMetalGrey]

Not 100% sure yet, gotta get one in my hands before I can sell em!

[wasnt m3]

Get a hold of me when you know. Need one for the M3.

[GunMetalGrey]

Sounds good, I will roll them out as a product when they are ready to go

Sent from my XT907 using Tapatalk 2

[Earl]

Anything come of this yet?

[GunMetalGrey]

I wish. When I do r&d I don't pay too much, so turn around is slow.

But I might just suck it up, it has been a long time lol

Sent from my XT907 using Tapatalk 2

[Earl]

No problem=) I just wanted to make sure this didn't get lost. Rowley was thinking of trying his hand at some too

[Bassboy3313]

I would be interested in one for the e21 if possible.

[bigjae1976]

Some selector rods have a subtle bend.

I do like the idea of a double shear rod. I've had one in my 330 and M3...makes a significant difference. I'd go with AKG, just better quality. I got a DSSR for my 330. Spend 4 hours trying to get it on. One of the ends were a slightly off so it would not go on. They said it wasn't possible. I bitched and they did an exchange. The new one went right on.

[Rowleym]

If you have any drawings I can make them! Ben you could even come down on the weekend and watch/help make them.

[Ryan...]

I want one too!