'88 E30
-
Driveshaft is off
Trans mount is off
Only thing holding engine in right now is slave cylinder/line
Engine mounts. Shift selector.
And motivation
-
So I can get ride of a crusty piece of shit that's 27 years old.
I wonder how functional it is in its current state.
But mainly so I have one less thing to put back into the car
-
Use a plastic e36 one, or a universal one. Weighs nothing and keeps your car from smelling like gas all of the time.
Good work on the swop, this should be awesome.
Sent from my potato phone
Id welcome the smell of gas.
This thing smells like oil/coolant now
-
In all seriousness though, I may replace it and try and hide it somewhere. The one that was on there now is zip tied to the brake lines
-
the smell really isn't anything noticeable in my experience. Mine has been removed/vented to atmosphere since I got the car and never have i smelled gas to the point of getting annoyed. But then again, I know, engines/cars are not all created equal.
-
Driveshaft is off
Transmission mount off
Exhaust is off
Only things left are the slave cylinder & engine mounts
Hoping I'll be able to pull motor with headers attached...
-
-
Removable core support was the best decision in my life (a close second was Mac sauce on a mcchicken. -no lettuce because I'm not a damn rabbit)
This is one greasy bitch.
Good news is my car protected itself from rusting any worse than it already was by neatly spreading oil everywhere.
Anyhow. This will chill on some tires until it finds a new home.
Super glad I picked up bottlecaps from Drleadballs on the cheap.
The hoist was too tall to fit under the rack.
I didn't want to put the car on jackstands.
So substitute bottlecaps (a close third behind Mac sauce on a mcchicken, maybe even a tie?)
That's about it for now. Gonna clean the bejesus out of everything. And then maybe get around to ordering parts for the s50.
-
Trans is clean enough for me.
I do give earl props for the tooth brush. I used a wire brush for 14 seconds and gave up. Sprayed it with gunk and pressure washed it instead.
Then rolled the car outside, gunked it & pressure washed it. Rolled it inside, cleaned some more and then temporarily hit it with flat black (I believe the PO had satin/semi gloss) I may try to go back to that. Not sure
It's no gunmetalgray bay, but I'm okay with it
-
Still have yet to order parts
-
What was your decision on the charcoal canister?
I got rid of mine last year including the hardline that ran to the back, had it wrong the tank pressurized which was funny. I am now venting to atmosphere and using a garden tractor style fuel filter to keep things clean. -
I'm just going to vent to atmosphere and toss a filter on the line
-
Yep, that's how I ended up.
-
Going to hold myself to actually ordering parts tonight so I can get this thing back together
-
Why isn't this done yet? Ay ay ay!!
-
Are you gonna make it to the E30 Picnic?
-
Is that a Garagistic bar?
-
Is that a Garagistic bar?
Ireland engineering
-
Why isn't this done yet? Ay ay ay!!
Because I suck at buying things
Are you gonna make it to the E30 Picnic?
Nope. Going to automotion with some friends
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login