Chapter GMW | E30 LS1 (starting on post #1427)
-
Got this far.
Then I looked up and saw this:
I'm just laughing at myself now. #$&?/$*!!
Does anyone know how to do this??
@DrLeadFoot
-
Let's talk Jesus.
How to torque the stretch bolt to 200ft/lbs without the flywheel lock?? I have the oil pan off... 2x4 to wedge the crank against the block and give her? That's what I did to get it off. HELP!
@DrLeadFoot
-
Car in gear, park brake set, wheel chocks in front of rear wheels. Id hate to see you wreck the block or something Perhaps a better idea exists but this is the best i can come up with on a thursday night
I had to do my jesus bolt in car, and doing it this way did not feel good. I tried it and stopped, also the car started to go up the blocks lol. I have the proper tool that bolts to the crank using the dampener bolts and then you just rest the handle on the ground and get a torque wrench, feels much better than the car in gear method. If you want to borrow it let me know, more than happy to help.
-
I had to do my jesus bolt in car, and doing it this way did not feel good. I tried it and stopped, also the car started to go up the blocks lol. I have the proper tool that bolts to the crank using the dampener bolts and then you just rest the handle on the ground and get a torque wrench, feels much better than the car in gear method. If you want to borrow it let me know, more than happy to help.
I.LOVE.YOU.
PM sent
@DrLeadFoot
-
Got the cam tray on, rtv'd and bolted up the valve cover.
Maybe tomorrow I'll start on the oil pump & pan if there is time.
@DrLeadFoot
-
Going to have to custom make a tool or just buy this and modify it: http://www.pelicanparts.com/cgi-bin/smart/more_info.cgi?pn=TOL-3034-2
Lightly rtv'd the gasket added blue loctite then torqued down the pick-up bolts.
Installed the oil pump. Blue loctite and 17ft/lbs all bolts including the reverse threaded grade 8 oil pump bolt. Proceeded to safety wire the bolt.
@DrLeadFoot
-
Lookin good man! Keep it up!
-
-
Is it nessesary? Hope not cuz the pan is on and torqued. ........
@DrLeadFoot
-
Might do this before getting mega.
@DrLeadFoot
-
Get some wheels with a reasonable offset so you can run some real tires (your current tires are silly being 225 or 235) and go from there.
-
I'm running 215's haha.
The oil pan is on! Might do some work tonight.
Update on the to do list:
- Install new motor mount bolts to the passenger side. Drivers is done. DONE
- Torque down transmission. DONE
- Prime and paint the frame where and front subframe connect. DONE
- Install subframe. DONE
- Install steering rack and skid plate. DONE
- Intake manifold, throttle body and hook up charge pipes. DONE
- Radiator and fluid.
- Add oil.
- Turn motor over by hand 20 some times to pump the oil through the ant farm.
- Install and bleed rear calipers. DONE
- DRIVE!!
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login