Chapter GMW | E30 LS1 (starting on post #1427)
-
So it isn't a vacuum, just a low pressure, it attaches post turbo right? There will still be some pressure. I am not sold on this setup. Why not just a catch can vented to atmosphere? I understand that you don't want oil going into the turbo inlet so this would be the next best thing.
-
My crank case set up goes from the valve cover vent--->catch can--->exhaust vacuum.
If you pull vacuum from the crank case it makes more power from what I've heard from drag racing / turbo guys.
@DrLeadFoot
-
I see a lot of people running the crankcase vent to the exhaust. I have mine run to a catch can then to a port just downstream of the air filter.
the turbo inlet is completely dry and oil free and the catch can is doing its job. So far so good. Not sure if its more of a concern on a 24v though. -
I see a lot of people running the crankcase vent to the exhaust. I have mine run to a catch can then to a port just downstream of the air filter.
the turbo inlet is completely dry and oil free and the catch can is doing its job. So far so good. Not sure if its more of a concern on a 24v though.
This is how I have my catch can setup too on my turbo m10.
-
-
One row is for the pump the other for the timing.
I'm glad I noticed these rounded off teeth. Worse than expected.
@DrLeadFoot
-
Not normal at all. The chain flopping around when the pump snapped had to round them off.
@DrLeadFoot
-
Does anyone have a TDC flywheel locking pin? Or could make one?
Specs:
http://www.advrider.com/forums/attachment.php?attachmentid=219972&stc=1&d=1258414732
I will be making my own camshaft lock tool:
@DrLeadFoot
-
Does anyone have a TDC flywheel locking pin? Or could make one?
Specs:
http://www.advrider.com/forums/attachment.php?attachmentid=219972&stc=1&d=1258414732
I will be making my own camshaft lock tool:
This is soo ghetto. hahaha. Why do this when you can go to concours and ask todd or burger to borrow them for the weekend or such. Not like they use them at the dealer everyday.
-
I'll do that! Timmy, you are always pulling through!!
@DrLeadFoot
-
I will be getting the VAC harmonic dampener. I tried to order it today but they didn't have time to process my order. I called twice. Great products, phones... not so much.
@DrLeadFoot
-
Got this over the weekend.
Is anyone familiar with timing the S52 that could swing by my house and make sure I have it correct? Willing to pay $$$
@DrLeadFoot
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login