Chapter GMW | E30 LS1 (starting on post #1427)
-
Just got a call from Kummrow and they found out what the problem is!!!!!!!!!!!!!!!!!
The key that holds the timing pickup wheel (remember guys I'm OBD1) sheared and was stuck 180 degrees off. Hence everything working but the timing off.
They are going to over torque the bolt and add loctite. THEN THE DOC IS BACK ON THE ROAD!!!!!!!!!!!!!
@DrLeadFoot
-
This is saving my wallet!!
Now I have 2 ecus just in case one dies!
I seriously have been having terrible dreams about my car being worked on and constantly finding something broken/loose. Last night I was physically pushing the car back and for from Klode park in Whitefish Bay to something that looked like the Porsche tech's wing in Concours.
@DrLeadFoot
-
Hey! Me and TJ tried to chase you down on Saturday night by the Flamingo in the dells... and like a ghost you vanished to the night.
-
The culprit.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
She is running great!
The "to-do" list:
- Finalize wideband wiring.
- Heat wrap turbo and downpipe.
- Swap wastegate vacuum line for a larger inner diameter one. (This should result in more boost.)
- Get boost up to 18-20psi.
- Dyno the car and record boost.
- Send results to TRM for an updated tune.
- I'm forgetting other little things but they aren't motor related.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
She is running great!
The "to-do" list:
- Install Megasquirt
- Finalize wideband wiring.
- Heat wrap turbo and downpipe.
- Swap wastegate vacuum line for a larger inner diameter one. (This should result in more boost.)
- Get boost up to 18-20psi.
- Dyno tune the car and record boost.
- Perfect the tune myself on my laptop
- I'm forgetting other little things but they aren't motor related.
Sent from my SCH-I535 using Tapatalk
How much downtime do you get when you send the ecu to TRM
-
If I pay for next day air both ways 3-4days. They are great to work with.
Haha. Megasquirt next year.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
If I pay for next day air both ways 3-4days. They are great to work with.
Haha. Megasquirt next year.
Sent from my SCH-I535 using Tapatalk
Those probably have added up to the price of megasquirt by now=P
You might be correct.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
I got my wideband hooked up correctly two days ago.
Today I'll be stopping by Pegasus Racing for some heat wrap and the larger diameter hose with the correct a/n fittings.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
Good to hear man! Now go burn some rubber
-
As predicted she goes back on jack stands. Oil light came on after a 3rd gear pull against a crotch rocket. I didn't seize the motor so hopefully I'll be all good.
I have no oil leaks. The level is right where it should be. I'm guessing that the oil pump bolt loosened up. I know that Kummrow didn't weld/safety wire the nut. Ugh.
Anyone want to swing by and wrench today? I can get the grill going!
I don't want to pull the motor so I'm going to drop the subframe. I wanted to paint it anyway. (Calling Zachary) Anyone have an engine brace that braces from the fenders?
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
Andrew?
It was making a little rattling/ticking noise but hopefully it is the oil pump chain that is slapping around in there.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
Yes. Andrew. I know he has one. Andrew is just his username. Most people know him by the name Andrew. If it is of any comfort. I had an oil pump fail on a vw once while i was on the freeway. Heard the bearings clicking and clacking , limped it another 3 miles home and it ran fine after replacing the oil pump
-
You can just make an engine support from 2 2x6s, an eye bolt, and a couple rags to protect the paint on the strut towers. Easy as pie!
-
Just to see what the damage is.
I have all of the bolts off of the oil pan. It still is really tight on the transmission side even with loosening the two lower trans bolts. Do I need to pull the trans to get the pan off?? Help!!
The front of the pan is loose and while I was hitting it with a rubber mallet you can definitely hear something metal bouncing around in there. I think it is the oil pump sprocket by the sound of it.
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
-
Trans inspection cover gets removed to get the last few screws out. Hope the results come back okay
Is that the sheet metal piece that can only be removed by removing the trans?
Sent from my SCH-I535 using Tapatalk
@DrLeadFoot
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login