Chapter GMW | E30 LS1 (starting on post #1427)
-
owner in the engine bay because there is no where else for him to stand?
nice progress!
Dan
-
Nice!!!
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
Welp...
Bank 1
1 out of 3 weren't leaking coolant.
Bank 2
3 of 3 were leaking.
@DrLeadFoot
-
Fun! At least it is a very evident issue.
Recommendation, use n54 exhaust manifold studs. They have a torx head on the end so you don't have to double nut every stud in. Doesn't really matter now, but just good info to get out there!
I'm glad to see you digging into this again!
-
Motor is at C&S. Hopefully they can bring it back to life. Cylinder #2 had water in it and was rusty.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
I've seen that before, and it cleaned up with a quick honing. Depends on how deep it is pitted though. It will just retain oil better, some call it 'seasoning".
I love the positive vibes! Kinda nervous about this.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Welp... Cylinder #2 is cracked.
Who wants to buy some m/s5x parts?!
Manifold, exhaust, turbo, intake manifold fitted for direct injection meth, 60# injectors, billet fuel rail, K1 rods, s52 crank/cams/ported head, VAC ATI Super Damper, UUC twin disk clutch, 2 ZF transmissions, M52 block, S54 oil filter housing, tial 44mm wastegate
ALL FOR SALE
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
Welp... Cylinder #2 is cracked.
Who wants to buy some m/s5x parts?!
Manifold, exhaust, turbo, intake manifold fitted for direct injection meth, 60# injectors, billet fuel rail, K1 rods, s52 crank/cams/ported head, VAC ATI Super Damper, UUC twin disk clutch, 2 ZF transmissions, M52 block, S54 oil filter housing, tial 44mm wastegate
ALL FOR SALE
Sent from my SM-G935V using Tapatalk
Not sure if this is a joke or ls swap.
-
I'm leaning LS swap with these first reactions I'm having.
Sent from my SM-G935V using Tapatalk
@DrLeadFoot
-
This is a sad day.
-
Damn! Sorry to hear
-
Sad day and sorry to hear
I should buy parts from you though
-
This is hopefully an early April fools joke
-
She gone. Gotta pick it up from C&S and I will take pictures.
Asking for a friend:
He wants to boost but need an aluminum block so his e30 can still be an e30 when he wants to hit the twisties. He was thinking LS2 with lower compression pistons. What head? Cam? He is a noob when it comes to the bowtie lifestyle so he asked me to thank you all in advance for any advise.
@DrLeadFoot
-
She gone. Gotta pick it up from C&S and I will take pictures.
Asking for a friend:
He wants to boost but need an aluminum block so his e30 can still be an e30 when he wants to hit the twisties. He was thinking LS2 with lower compression pistons. What head? Cam? He is a noob when it comes to the bowtie lifestyle so he asked me to thank you all in advance for any advise.
I think said friend should get on here and ask those question.
1976 530i e12
1990 325ix e30
1992 325i e36
1995 740il e38
2001 330xi e46
^More to come
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login