Chapter GMW | E30 LS1 (starting on post #1427)
-
-
-
The parts are slowing coming in!
90mm Studs
15MM Spacers
@DrLeadFoot
-
-
Came across this today.
http://www.bimmerforums.com/forum/showthread.php?2165294-PNP-wiring-for-MS3x-to-OBD1-m50-Harness
@DrLeadFoot
-
What a great thread that is
See you saturday!
Does that make perfect sense to you?? Wanna build it for me??? Haha
I won't be there.. getting married Friday then headed up to Kohler for a mini-moon!
Have fun!
@DrLeadFoot
-
I ran into a ton of issues by trying to follow DIY's , proceed with caution.
Also, the last part of that is overkill, there is no reason to go through all that trouble of making a little board like that, when you can just rock another relay that switches ground. Tis what I did. -
Yeah I know, im tagging along on the mini-moon.
I was planning to just show up in Kohler. I thought driving with would have been intruding...
-
She is going to be super excited when I give her the updated headcount!
@DrLeadFoot
-
Test fitted the wheels with out the tires. The fronts look good. 17x9 et25 with a 15mm spacer making them et10. 245/40s should be okay.
The rears are so tight but don't touch. 1mm of clearance from the trailing arm and spring perch. 17x10 et20. I hope the 255/40s stretch a bit on the 10in wheel.
Urban Motorworx is mounting them and should be ready for pick up tomorrow morning.
Hopefully concours can squeeze me in for an alignment tomorrow if all goes well with the fitment.
@DrLeadFoot
-
Not sure yet. It all is pretty close. I have a skinny 2mm spacer somewhere that I might have to find.
@DrLeadFoot
-
Ordered new rear wheel bearings, the allen bolts that attaches the axels to the diff. Gotta get that new diff installed!
Going to have the talented Snap powder coat the M-Coupe cover and some other parts.
Side note, these tires are awesome! Slowly pushing the limits while being scared of curbs and cement walls but it's on rails! I still need to address some rubbing issues. Thinking I'll totally cut out the inner fender a quarter of the way from the outside of the car and fiberglass it back shut and/or purchase some adjustable rear coils with some stiffer springs.
@DrLeadFoot
-
-
Congrats again man!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login