E30 M50 tear down kinda thing
-
how many bolts hold your core support on? how many welds held the original in place?
a small front end collision could end up smashing your motor instead of the intended bumper/core support if its not held on tightly.
Dan
-
straight6pwr said:
how many bolts hold your core support on? how many welds held the original in place?
a small front end collision could end up smashing your motor instead of the intended bumper/core support if its not held on tightly.
A total of 4 bolts right now along with my welds on the brackets for support. Ill be adding 2 more bolts up top and 2 more on the bottom. Originally, there were 10 very small tack welds on top at each side, and I believe 2 welds on the lower bumper shock housing area.
After seeing how flimsy the oem metal of the old core support was, along with how flimsy the metal of the inner fender wall was, Im not convinced the stock support would have held up very well at all. You can pretty much use your hands to bend the entire from clip of the car in.
A front end collision would have to be hard enough to push the bumper shocks in, push the housings back at least 3 inches, and then hit the core support. I think it would have to be a pretty hard to to push the shock housings back that far, but who knows. I honestly feel much safer with the new set up compared to the old one.
-
Hai guyz. I havent been working on the motor a lot lately because Im still waiting for my headgasket to come before it can go back together.. But I did work on the bay a bit last night. This is something I have wanted to do since my first e30 a couple years ago! Enjoy this next little project for making my bay look a lot cleaner
These will just be tack welded in a couple of areas, then a little bit of bondo around the edges to make it look perfect with the bay. Once thats all said and done a couple coats of semi-gloss black will be going on. It should look really clean.
-
Rowleym said:
I'm seriously copying the sheet out of you. It's not on purpose, but you just beat me there.
Lol its all good. It was supposed to be a laid back night on cleaning the bay, until some sheet metal got dragged out. It still needs to grinding on the inside, but the core support fits with the plates in there, so thats cool.
I look forward to seeing your core support and engine bay plates too! Nothing nicer than a clean bmw bay
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login