Tig/Mig welding and powder coating

[rampelsauce]

I took a bunch of your money, now we're friends.*

*Results not typical.

[gilber33]

rampelsauce said:

I took a bunch of your money, now we're friends.*

*Results not typical.

From powder coating to brunch.

[rampelsauce]

Working on some more stuff for @gilber33 and his M20. 

[gilber33]

[gilber33]

[E60M5]

I need to either restore my oem rims or have it powered coated...help wanted

[rampelsauce]

E60M5 said:

I need to either restore my oem rims or have it powered coated...help wanted

Let me know bud.  My availability is pretty open most weeks.

[Boris3]

Impressive work!  Once I get some time to pull some things off the car, I'll be in touch about a bit of suspension-related welding work.

[rampelsauce]

Boris3 said:

Impressive work!  Once I get some time to pull some things off the car, I'll be in touch about a bit of suspension-related welding work.

I'll be doing some of that myself.  Lots of subframe reinforcements and what not on my 332ti project.

[Boris3]

With a 332ti you'll need it! Fun swap. After driving John Morgan's beast I still have a soft spot for the combination.

I'll just need some new lower spring perches welded onto e30 strut tubes for a Ground Control setup on the race car. Finally have all the parts in hand. Possibly cutting/shortening and rewelding the tubes as well. Still thinking about that one though.

[rampelsauce]

Did some crazy multi stage coatings with masking for my fiance's co workers at tosa east high school.

[Boris3]

Boris3 said:

With a 332ti you'll need it! Fun swap. After driving John Morgan's beast I still have a soft spot for the combination.

I'll just need some new lower spring perches welded onto e30 strut tubes for a Ground Control setup on the race car. Finally have all the parts in hand. Possibly cutting/shortening and rewelding the tubes as well. Still thinking about that one though.

Decided to cut the strut tubes 1.5" for better suspension travel. Shortened and rewelded strut tubes back from Zach in a very fast turn around. They're sitting at an angle on the workbench in the pic which distorts the lines a bit but everything is clean and straight. Thanks Zach!

Now need to paint, fab some spacers for the short body Koni's, put everything together in the GC kit and install in the car.

.

[Boris3]

First race on the new setup this past Sunday. Thanks Zach.

[B C]

Nice work Zach, the coating looks top notch!

[rampelsauce]

Glad I could help.  I'm currently moving into my new place with some more space for more equipment.  Will definitely be shifting focus to welding, but will still offer coatings.  I'll get better at posting pictures here, might change up my instagram to show off some of my weld stuff too. 

Thanks to everyone so far supporting my side hustle and I look forward to getting back at it full steam in June.