'88 E30
-
Auto-x'd and evo x today. It was neat. Didn't work on my car. Thought about it though
-
Those seats look good in there. I noticed in my own car and believe I read somewhere that the steering column isn't exactly centered to the seat of E30s from the factory.
Had to check.....http://www.r3vlimited.com/board/showthread.php?t=278956
-
Those seats look good in there. I noticed in my own car and believe I read somewhere that the steering column isn't exactly centered to the seat of E30s from the factory.
Had to check.....http://www.r3vlimited.com/board/showthread.php?t=278956
I'm may try and rework the bracket a touch
-
As a part of the CES cut ring install, last night I refinished the block.
Used the coarse/fine sides of the stone. Tons of brake cleaner, wd-40, lacquer thinner, rags and beer.
Biggest thing I found was keeping the stone and block clean and well lubed. As soon as the WD started to change colors, the stone didn't seem to "cut" anymore.
Plugged up the cylinders as best as I could with plastic and tape, oil and coolant passages will be brake cleaned and flushed to death.
This is what I started with:(only crappy pic I took before hand)

And this is what I ended with

One step closer
-
Making this engine great again.
Hopefully
-
Power steering is back in. Can't wait for that shit to leak everywhere.

The e36 line design is absolutely annoying

This rack was powered when I was m50, until I dumped the s50 into the car, then I ditched the PS. It's been manual for a season-ish. Hopefully there aren't any surprises going back to power
Here's to not trying to break my steering column in parking lots & being able to turn quickly at low speeds.
-
manual rack ftw!
-
I've ran it PS-less for a year and at a few events. It wasn't a "ftw" type of feeling.
Bottom line PS is nice to have
-
That's because a PS rack without the PS is no bueno. BUT a manual rack that is made to not have PS is ftw! The e21 has a manual rack and I love it.
-

Cams in the AM
-
Was your head that clean to begin with or did the shop clean it?
Machine shop hot tanked it
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

