Build Thread?
-
so awesome. how did you raise it? also, it would look killer with a roof rack for the shovel, spare, gas can etc. yakima makes an 'axe bracket' that would be perfect for the shovel.
-
so awesome. how did you raise it? also, it would look killer with a roof rack for the shovel, spare, gas can etc. yakima makes an 'axe bracket' that would be perfect for the shovel.
I have been thinking about welding something up for a roof rack, and then just welding it to the car. Low cost is key with this car.
The rear is using e36 springs and shocks, no sway bar (this was critical to getting it high enough)
The front is on vert springs, and should have strut spacers soon. Spacers will bring the front up another 1.25"
One of the front springs is still stock, and the pictures make it obvious. Drivers side is still stock. Darn ball joints didn't want to separate with out destruction.
I need to get a pile of parts for the front suspension, e46 control arms, longer tie rod ends, and new struts. -
I have been thinking about welding something up for a roof rack, and then just welding it to the car. Low cost is key with this car.
The rear is using e36 springs and shocks, no sway bar (this was critical to getting it high enough)
The front is on vert springs, and should have strut spacers soon. Spacers will bring the front up another 1.25"
One of the front springs is still stock, and the pictures make it obvious. Drivers side is still stock. Darn ball joints didn't want to separate with out destruction.
I need to get a pile of parts for the front suspension, e46 control arms, longer tie rod ends, and new struts.yakima raingutter towers go for like $50 on craigs, iron pipe (which comes in the correct diameter) from home depot for the crossbars costs nothing, then just weld your custom rack to that.
-
Finally ordered the bottom end parts for the M52.
Should be getting the motor for the "nicer" car back together soon! -
Finally ordered the bottom end parts for the M52.
Should be getting the motor for the "nicer" car back together soon!
It is nicer. But it will never be cooler

-
It is nicer. But it will never be cooler

Ouch
-
There is finally a motor in my car.
Brake fluid res. is in the way.Yup
-
I was using an IX master cylinder and the stock IX brake fluid res. The throttle boot for the e36 has the IAC hose running into the underside of it, right where the fluid res. is.
e21/2002 res. incoming. -

That should give you a frame of reference. (older picture) -
e34 m60 cars have a remove res setup too if parts would be cheaper?
-
That's an odd booster for a swap???
I believe I have a Porsche one on my car
-
IX Booster isn't quite as common, probably why you haven't seen it too frequently.
Parts were pretty cheap, for the res., grommets, and fittings for the master it was about $40 shipped. -
Probably not as common because it clearly has some clearance issues Clarence
-
Not worried about the motor torquing into the bottle?
Sent from my iPhone using Tapatalk
Not really , delrin motor mounts. That was the old setup. New setup is remote.
-
Got the new res. set up and did a bunch of work in regards to exhaust and the front end of the car. Should be able to give it the first start this upcoming weekend if everything goes to plan.
A shopmate's girlfriend picked this up from a guy that had it in a climate controlled storage unit. It had been stored since 1997, with the tags on the plate to prove it.
He dumped the "gas" and replaced all of the fluids and the fuel filter. It fired right up. Five spd 85 535i with 140k miles. Pretty cool car!
It is absolutely amazing how good of shape it is in, there is so little rust, and at that it's only faint surface rust.Hopefully if I get the car running next weekend I will be able to drive it shortly thereafter, because snow is on the forecast and the e30 doesn't deserve salt!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login






