1991 318is M62B44 Build
-
^ could even loosen up the CSB if needed. Don't forget the preload when re-tightening
-
Whew - So I took two longer bolts and hung the diff by the two rear holes that gave it room to move. Got the front two lined up, then brought the back two up and replaced them with the stock bolts. Was not easy, but I am happy its done. Going to get the driveshaft back on and start working on a few other things.
Big projects right now are:
shortening up the wiring
replacing the whole interior (switching from beige to black)
Redoing the brake lines
Relocating the oil filter housing
Hooking up the power steering
And probably a lot more.
Good news is I know it runs, and with the new diff it will be a lot more fun to drive.
-
Good news is I know it runs, and with the new diff it will be a lot more fun to drive.
4.10 with m62? can't wait to see that.
Dan
-
oh your post read like you pulled the 2.93 and put back the 4.10, my bad!
Dan
-
Rewelded the transmission mount for more strength and ran the wiring through the firewall today to clean things up.
I'm a little confused on the power steering routing...
Basically the routing for me will be:
reservoire -> power steering pump -> rack -> cooler -> reservoire
The smaller bolt on the E30 power steering rack. Is this the pressurized fluid going in or the fluid coming out?
-
your routing is correct. not sure if you really need the cooler, though, not all e30s had them. its not particularly hot around here...
from realoem, it looks like
M16 (larger) banjo bolt is on the supply line from the res to the pump
M14 (smaller) banjo bolt (both ends) goes from the pump to the rack
then
M16 (larger) banjo bolt returns from the rack to the res. with the cooler in there for cars that came with it.
Dan
-
Well I was able to get creative with some extra lines.
Power steering is hooked up and the oil filter is relocated.
Before picture - notice how cramped (the oil filter) that would be with the brake booster relocation
And now:
Now I am going to redo all the brake lines (in the mail), install the coils and BBK while I am at it.
I got the wiring moved into the interior so that is progress, but it still needs to be cleaned up. Whole interior back in. I'll probably take the motor/trans out to redo the brake lines and clean everything up while its out.
Then throw some miles to work any potential gremlins out, put it up for sale, and start work on the LS M3.
-
Awesome work!
Sent from my SM-G900V using Tapatalk
@DrLeadFoot
-
Brakes system is done.
Engine and trans are back in.
Headers were ceramic coated and installed.
Cant decide if I should do the coils now so I only have to bleed once or down the road. Other than the height change will installing the new coils/knuckles change the steering to the point where I'll need an immediate alignment?
-
A ton more progress last night. Did a test fit of the headlights and hood and luckily my dimensions spot on.
All the routing (gas, coolant, PS, oil, clutch) is officially done, which was a huge headache. Waiting to make a mount for the PS reservoir after I do some more thinking on it. Overall much much cleaner than it last was and I am very happy with the outcome.
Really don't have much left before she is road worthy again and I start working the bugs out. Now if only this weather would cooperate...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login