'88 E30
-
Sway bar is mounted and torqued
Got the control arm offset bushings on (pain in the ass because of the taper)
I'll most likely pop those in tomorrow. After they are in I'll be dropping the engine back onto the subframe so I can get the support bar out of the way. Then it'll be on to the rear subframe
For anyone who was curious about the ST sway bar hardware here's a picture. Way beefier Than the oem stuff. Washer has a gap due to this shit being 28 years old
Also does anyone have any use for these rear trailing arm sway bar mount reinforcements (and bushing brackets)?? I already had these reinforcements.
If you pay postage they're yours
-
It's official. I have no idea what to do for suspension. I can't make up my mind
-
are you going to do 6 or more track days every year? adjustable coilovers.
if not, just pick a tried and true setup and roll with it. I'd say Koni/IE3 or Koni/H&R is failproof.
Dan
-
are you going to do 6 or more track days every year? adjustable coilovers.
if not, just pick a tried and true setup and roll with it. I'd say Koni/IE3 or Koni/H&R is failproof.
Intentions are to get into some more auto x events. Car will be DD'd in the summer on occasion but I'm not relying on it as my only mode of transportation.
Only reason I was after adjustability is I can choose my spring rates and adjust the front end of the car for height
Adjustability sounds very nice at this point
-
Savebigmny, add me.
Sent from my 831C using Tapatalk
Snapchat?
-
jc43089 said:
Savebigmny, add me.Sent from my 831C using Tapatalk
Snapchat?
Yes
Sent from my 831C using Tapatalk
-
Control arms are on & skid plate is mounted. Tomorrow going to lower the engine back into the subframe
Can someone verify that these are torqued to a measly 30ftlbs??
This much room between the pan and skid plate. Should take some decent hits if necessary
Can easily get the drain plug as well
Led light added the lined look, it's not actually there
Hopefully I can get this heap in tomorrow
-
This much room between the pan and skid plate. Should take some decent hits if necessary
not 'if necessary'. its going to happen. probably a lot. and it will be terrifying the first couple times. WHACK!
my favorite was roads and alleys that were crowned enough that the skid plate just scrapped along them the whole way.
Dan
-
Engine is now back to where it should be
Everything under the front of the car has been torqued. Just need to get struts/brakes in the front.
Didn't get around to the rear subframe yet, but I imagine I will swear at it a lot
-
looks good Mitch, would like to see this at the E30 picnic
2011 E92 M3 6MT ZCP - ESS 625 supercharged
2007 Z4MR
2003 E39 M5
2002 E46 M3
2021 X5 40i -
looks good Mitch, would like to see this at the E30 picnic
Thanks Man, I would love to go to the picnic as well but I think I am being dragged to automotion (unfortunately) by my gf.
I'll report on all the flat brims, diesel trucks and Chevy cruzes I see
-
This is coming along nicely. Looks clean!
-
-
just caught the dust scribble..nice.
I am trying a new technique of writing down my feelings Dan. This is how I express myself.
Some people build bird houses, I scribble on dusty cars
^this is a joke btw- I wrote that on my car like 9 beers deep haha
-
Just ordered some hawk pads, stainless front lines, Motorsport hardware stud conversion & new diff plugs (mines weeping a bit of fluid) I think I had put royal purple in it last year...any recommendations for diff fluid? Weight?
-
I had redline 75w90 in mine, no issues to report for the >5,000 miles I put on the car since I did it. I will be putting the same thing in the M next weekend. How did the Red46 skid plate fit? I have the m42 one sitting in a box since it hasn't really been a priority on the e30 job list lately
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login