e30 rims advice
-
They are heavy, the 17" set I had required 10mm spacers+some caliper grinding to fit. I hate my life and I regret every day of my existence because of it.
I sold them for many reasons. The main reason was that I hate my life, other reasons include the fact that they are heavy, a 9 year old flicked a booger at me, and I had a genuine fear that with continual hard driving that they would disintegrate, cascading me off of one of the many treacherous cliffs of the New Berlin coastline and into a very death-like state.
In all honesty, for someone that doesnt drive their car hard, they are perfectly fine. Just check for cracks after any hard pothole hits and during semi-annual tire rotations.
They are also heavy.
-
haha, yeah 17" will be too big for me. I was worried 16" might even be too big
-
That looks good HipMF. Size rim, tire, offset? Any fender rolling or spacers?
-
whats your budget? has a lot to do with rim selection.
sizes? really no reason to go wider than 7.5" for an everyday car. 15x7, 15x7.5, or 16x7.5 are good options.
some of my top favorites for those size: all of these fit without spacers or fender modifications.
e30 Euroweaves (15x7 et 24)
Ronal LS (15x7.5 et 25)
Ronal Turbo (15x7 et ??)
Borbet type C or type A (16x7.5 et30)
Azev type A (16x7.5 et20)
Any BBS weave style rim. RX, RZ, RS, RA (come in 15x7 to 16x7.5 sizes)
If you must pickup a set from ebay, the RS replicas look nice. with a size like 15" or 16" i wouldnt be too worried about bending as you still have a lot of tire. make sure its somewhere around et20 or et25 and stay away from anything 9" wide.
as snap said, spacers work but are annoying. they get stuck to the hub, have to come off if you run winter/summer wheel setups, need longer lugs, blah blah blah better to avoid them.
Dan
-
Here are some pics of the car. Not the best, but best I found on my phone. This will give you sense of the ride height. Front is too low, I'm going to raise about 3/8" in the spring. I don't track or do anything aggressive with the car. Just cruise around on nice days. I just want a classic rim like the one pictured with a little lip to it. Not looking to spend a lot as this isn't my daily driver and the car itself isn't worth BBS rims
I was looking at the ESM's online. These seem OK too on craigslist. They are 16x8" et25 on 205/45 tires https://rockford.craigslist.org/wto/5392345103.html prices seems about right. I was under the impression they wouldn't fit without rubbing? I can't figure out all this offset stuff.
-
I am assuming you have found the great wheel and tire fitment thread on r3v, thats your one stop shop on what combos fit.
Hi Snap,
I asked on there but haven't heard. I'm sure people are sick of responding to the same questions. Guess my question is will the craigslist ones I posted fit without rubbing or spacers? 16x8" et25 on 205/45 If those don't fit then I'll probably stick to a 16"x 7" or 7.5" rim if that's what people are recommending for just general street driving on a 16" rim
-
sweet, thanks guys
-
Those will fit without any issues.
IIRC, my girlfriend has those exact specs on her e30 with 195/40's.
to me if you have to choose a specific, undersized tire which has worse performance than stock sizes to make a wheel fit, than the wheel doesn't fit. performance here being grip, ride quality, and wheel protection. 195/40 = destroyed wheel if you hit a pothole. i think wheels should look good and i definitely like plus-sized stuff, but tires are just as important. earl, i'm not arguing this toward you, just the OP, so you can ignore me, and continue on with your stance-stance revolution.
Dan
-
to me if you have to choose a specific, undersized tire which has worse performance than stock sizes to make a wheel fit, than the wheel doesn't fit. performance here being grip, ride quality, and wheel protection. 195/40 = destroyed wheel if you hit a pothole. i think wheels should look good and i definitely like plus-sized stuff, but tires are just as important. earl, i'm not arguing this toward you, just the OP, so you can ignore me, and continue on with your stance-stance revolution.
Thanks, yes I'd agree 195/40 would be pushing the limit of what I'd feel comfortable with. I do like a little stretch in a tire, not a ton. I think 205/45 tires should be a good compromise to still have some "meat on the bone"
-
well, didn't get that guy to a price I liked so moving on from the Craigslist rims. Didn't love the white on them so unless the price was too good to be true I'm looking new. Two other wheels I like have the following sizes:
15x8" et20 would like to run with a 205/50 R15 tire or
15x8" et25 would run same size tire. I like this wheel better but can't confirm anywhere if the offset would work.
Any help is again greatly appreciated!
-
This is my car on 15x7 euroweaves with 205/55 tires. Hope this helps.
Sent from my iPhone using Tapatalk
-
Thanks Andy. I like 15"s think they fit the car just right. 205/55 looks like a good amount of sidewall too without being too big. You look lowered, are you?
Yeah, it's the width of the rim I'm looking at (8") and then the different offsets that I don't really understand what that all means and what the limits are of what can or can't fit. Thats what i need help with.
For those who dont see above this is what I'm trying to figure out if they fit, two choices I like:
15x8" et20 with a 205/50 R15 tire or
15x8" et25 same size tire
-
Fwiw I'm limited to a 15x7 wheel with a 205/50/15 Toyo in my race series with the e30. Offset in most rwd wheels in this size is +25. You can get a bit wider track with +15 wheel but it's a bit less common size in a 15x7. Some folks run spacers to get down to around +15 and the wider track width.
Ideally I'd like a 15x8 wheel with +20 offset and 225 tires but such is racing. Trade off of course would be the added weight.
The daily e30 has the stock 14x7 weaves and 195/60/14 in the summer and 185/70/14 snows. Went for cheap and functional.
Tire rack website has good illustrations of offset to help you understand the principles.
Given your two choices in the 15x8 wheels and the tire size the +20 offset would be the better choice, but other folks with more wheel/stance experience may have other insights.
-
That looks good HipMF. Size rim, tire, offset? Any fender rolling or spacers?
more pics here, but no specifics on the wheel size of offset
http://www.r3vlimited.com/board/showthread.php?t=295505
I can't figure out all this offset stuff.
I am assuming you have found the great wheel and tire fitment thread on r3v, thats your one stop shop on what combos fit.
If you haven't, look here. (link?)
I like this wheel better but can't confirm anywhere if the offset would work.
...the different offsets that I don't really understand what that all means and what the limits are of what can or can't fit. Thats what i need help with.
Google it. The offset is a measurement between the center of the wheel, width-wise, and the wheel mounting surface, in millimeters. Lower = more poke, higher = more sunk. Check out the fitment thread(s) on r3v and pick whatever floats your dingy.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login