e12 complete restoration fun
-
I'm not sure how I'm going to clean it mint really want to sand blast very messy but I may. I am going to stainless shot blast parts I am keeping most suspension will be replaced
Mister Jeff. I do not know what you are saying due to your missing punctuation=(
Unless you meant:
"I'm not sure how I'm going to clean it. I really want to sand blast it, but it is very messy. I might do it anyways. I am going to stainless shot blast the parts that I am keeping. Most of the suspension will be replaced."
-
Mister Jeff. I do not know what you are saying due to your missing punctuation=(
Unless you meant:
"I'm not sure how I'm going to clean it. I really want to sand blast it, but it is very messy. I might do it anyways. I am going to stainless shot blast the parts that I am keeping. Most of the suspension will be replaced."
I'll go with the ladder.
I always thought acid dipping was where it is at for a restoration but I learned out that it takes away all of the inner rust proofing so it ends up to be a lot of work to do it right. Spraying that wax stuff in the inner frame rails, sealing the seams/welds(?). There probably is more to do than I know about.
@DrLeadFoot
-
I'll go with the ladder.
I always thought acid dipping was where it is at for a restoration but I learned out that it takes away all of the inner rust proofing so it ends up to be a lot of work to do it right. Spraying that wax stuff in the inner frame rails, sealing the seams/welds(?). There probably is more to do than I know about.
there are many ways to seal the inner frame rails. i usually use a piece of 1/4" brake line and an old paint gum to spray the inner rail with rubber coating. help at 120psi does wonders!!!
dropped the front subframe
also finished stripping out the engine bay finally.
1976 530i e12
1990 325ix e30
1992 325i e36
1995 740il e38
2001 330xi e46
^More to come
-
How are those bolts coming off with the rust?
With all the old bimmers I've had, all e30s, rusty bolts were never a problem. I can't say the same about my xj jeeps. I probably broke every body bolt on those...
@DrLeadFoot
-
superior German metallurgy, no joke.
It's true, the only bolts I have ever broken on my e36 were manifold to downpipe studs and the bolts for the rear trailing arm camber adjustment. (Those ones suck bad to drill out)
-
Glad I texted you yesterday Jeff=)
Me too I miss the forums work has been busy. We'll work and making stuff
Don't worry Jeff
This forum is like a creed song.
We are always here with arms wide open
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login