1987 325e. Eventually Boost+M50 Swap
-
Do the "i" head swap and keep the eta bottom end for sure! I would highly recommend to replace the valve seals while the head is off. Can you replace the rod bearings while the crack is still in? If so, do that as well.
I have a 524td manifold if you're interested. You'll have to source some adapters to make it work. A guy on r3v just sold some.
I would keep the metal bumpers. The rear sits a little higher so it is more aerodynamic because racecar.
What are you going to do for a tune?
@DrLeadFoot
-
-
Do the "i" head swap and keep the eta bottom end for sure! I would highly recommend to replace the valve seals while the head is off. Can you replace the rod bearings while the crack is still in? If so, do that as well.
I have a 524td manifold if you're interested. You'll have to source some adapters to make it work. A guy on r3v just sold some.
I would keep the metal bumpers. The rear sits a little higher so it is more aerodynamic because racecar.
What are you going to do for a tune?
How much are the adapters going for?
Sent from my iPhone using Tapatalk
-
How much are the adapters going for?
Sent from my iPhone using Tapatalk
I'm not sure. He took the post down
@DrLeadFoot
-
I'm not sure. He took the post down.
The 524d manifold would be awesome if its cheap enough
-
Or cut the bumpers off and make rally bumpers with a light bar for the front I've already got ideas fort e28 which is bumperless now
Pics of this?
-
I PM'd the guy that had the adapters for sale asking where he sourced the part. I'll let you know what he says.
I also sent you a PM
@DrLeadFoot
-
Due to the suggestions of a few forum members I think I am going to M50 swap rather than do the 2.7i conversion. The m50 swap has been covered multiple times and in reality it shouldn't be too much more work. Parts are more readily available and it will be able to handle the boost a lot better due to the fact it has twice as many valves. My bottom end also has 280k on it so I'd rather not push my limits.
Edit:
Could someone change the build title for me?
-
Is this a correct parts list? what else will I need?
someone said:
m50 longblock. + all accessories (sensors, intake manifold, etc etc.). preferably non-vanos but either will work. Ideally out of a E34 525i (I need this oil pan for clearance). I don't need a transmission or exhaust; I will be reusing my Getrag 260.
Special transmission mounts + bracket. GunMetalGrey might sell these?
e36 engine mount arms with e28 535i motor mounts (should I buy these new online or?)
I can reuse my e30 driveshaft because I will be reusing my g260 trans?
late model e30 coolant expansion tank 88+
brake booster? or relocate?
http://www.e30dohc.c...e=Brake_Booster
E36 steering rack +???or is it necessary?
And some misc items:
325es/325is/318is:
Sand Beige Sport Seats (in good condition, will give more money if they are heated.)
E36:
Sand Beige Vader seats (in good condition, will give more money if they are heated.)
325es:
Red Bumper Front Valence
Note:I will not need the following if I got ahold of an m50 from a e34.
E34 525i oil pan, dipstick tube, dipstick, oil pickup tube
E34 525i wiring harness
E34 throttle cable
-
Uhhhhhhhh... janky!!!
Headers from??
Zinnoberrot!
Theres my crank case breather hose? lol
This is supposed to be one hose...
Don't even know.. Don't even ask, aparently thats the window washer thingy? would explain why its not working....Ahh! rust! I'll have to have that removed in the near future.
-
looks like the work of a ver knowledgeable previous owner. i think the radiator hose is my favorite.
I actually bought the car off a guy named Jeff..... He's giving you "jeffs" a bad rep man.
He said it was an emergency fix because the hose cracked in the middle.
-
Looks like I will be the lone ranger with the only force-fed M20 around here afterall.
So that PCV hose doesnt connect to the valve cover then? that would make for a massive vac. leak and cause the car to run like potatoes
I'm sorry snap
I just don't think its worth it to do the head swap when I could probably source the m50+parts for only a couple hundred moreI don't know where that hose goes to I'll go take a look right now
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login