Alpine e30 progress/build thread
-
Got some fun things in the mail today!
Like I posted before they are 15x6.5 Weds Bavaria Fins. They weigh just over 13 pounds each which is on par with the equivalently sized d-force/kosei wheels to my knowledge. One has a very small flat spot in the lip so I may have that fixed but the plan is to refinish them back to like new condition in my free time here at school. I plan on running them with a stud conversion and 15mm spacers to basically emulate the fitment of euroweaves.
Does anyone know what would be the most cost effective method of taking the centers back to bare metal? I know media/sand blasting would be the best way but that can get pricey, maybe paint stripper?
-
use aircraft stripper to get the paint off, it takes all of 5 minutes.
Also, for lips. I also cannot think of anyone that makes 20 bolt 15" lips/barrels.
I do know that going from a 2 piece wheel, IE face and barrel/lip combo to a true 3 piece setup will require the face mounting point to be machined down on either the face side or the backside so you can sandwich them together. Worse comes to worse you can have Rotiform make you some 15" lips with step lip, or their 15" to 16" lip, slant lips look ugly though!
-
use aircraft stripper to get the paint off, it takes all of 5 minutes.
Also, for lips. I also cannot think of anyone that makes 20 bolt 15" lips/barrels.
I do know that going from a 2 piece wheel, IE face and barrel/lip combo to a true 3 piece setup will require the face mounting point to be machined down on either the face side or the backside so you can sandwich them together. Worse comes to worse you can have Rotiform make you some 15" lips with step lip, or their 15" to 16" lip, slant lips look ugly though!
Great, that's what I wanted to hear. I hadn't seen many people use that method but I guess my research only took me to very high end wheel builds.
And with the lips (Thanks to Earl too as I know he commented on this earlier) since no company makes similar lips, having custom ones made looks to be the only option...which is fine because I won't be going nuts with these anyway, I was just curious. Too many other projects to do first!
-
getting custom lips made is $$$$ for real.
Yeah that's what I've seen, thanks for the info! I like them the way they are though thankfully, very period correct
-
Thanks guys!
Had a bit of free time the other night so I decided to clean up two of the wheels, they are actually in much better shape than I thought!
It wont take much to make these perfect again! I will be picking up some aircraft paint stripper and the tools I need to take them apart sometime this week so I can really get going
-
those look great!!
menards sells aircraft stripper
(save big money)
its like 9 bucks. kind of a rip off
-
those look great!!
menards sells aircraft stripper
(save big money)
its like 9 bucks. kind of a rip off
Thanks!
Unfortunately the nearest Menards is 321 miles from me right now according to their website haha, there is an Ace a few blocks away but its like 16 bucks for a 32oz can...
-
This the look youre going for?
Eventually yes! For now I am going to keep them as they are (original barrels) and just make them look as mint as I can
-
I split two of the wheels so far, the bolts are a pain to remove from the face, spent an afternoon with a block of wood pounding them out only to have two get very stuck so I brought the faces to the shop in the engineering building and pressed them out, much easier. The bolts are very nice stainless so no polishing or anything is needed which is awesome.
Did a bit of archaeology, the faces were originally painted black and then at one point were painted a sparkly purple/pink/red color and then were crappily rattle-canned silver. I have my work cut out for me with the paint stripper
I soaked the nuts from the first wheel in white vinegar for the last three days just for shits and gigs...and it worked like a damn charm! I didn't have a before picture but they were a solid rust color and they are now perfectly bare metal
One wheel has a slight flat spot in one of the lips (it will still hold air just fine, but is visible if you look closely) so I may take that one to a wheel shop to get it straightened before I split it while I work on the others. More updates to come!
-
Looks great, what color are you planning on finishing them in?
Thanks! I'm not sure yet, I am split between a bright silver like the ones Earl posted, possibly a gunmetal color, or maybe even a bronze/gold color as I think it could look pretty good on alpine white. I am also debating blacking out the lug area like the older Alpina wheels, I will have to play around with photoshop to see what I ultimately like the most
-
I think silver would look the best. If you wanted to be really cool with them. Paint them black and then polish the face. That would leave it black in between the spokes=)
You mean like this?
I think that would look really awesome, in fact that might be my favorite option now. I have until May to get these things done so I can do just about anything haha
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login