e21 motor swap project
-
It's definitely not a big block. I can tell just by looking at the xhaust manifold. This is a small block. Probably a 400CI.
Here's the difference:
small block, the 2 middle exhaust ports are toghether/really close
Big block, the ports are evenly spaced.
Not trying to be an asshole, just clarifying. None the less this is a cool build.
I'm also a chevy guy. I owned a 1976 Chevy C10 stepside with a 406CI stroker motor. prostock cams, built up valvetrain, billet crank, custom cam, etc.
In for this though
I am aware of all these things. I build engines for a living and have worked in an engine shop for ten years. It is not a Chevy. What you are saying about Chevy small and big blocks is correct. It is a gm and the brand of gm it is, it is considered a big block. I chose this because of the downward facing exhaust ports.
-
Gm/Chevy= practically the exact same.. Comes out of the same factory
Agreed. Same basic design but this motor came out of a pontiac. Chevy and pontiac don't use the same motors. It is a big block pontiac. The head design is completely different.
-
Earl, you can restate your same comment all you want. But when most people say a GM/GENERAL MOTORS "big block V8" Everyone goes, GMC/CHEVY. The pontiac route is rarely gone over. So yeah, I'll accept I was wrong. But just because he's done motors for 10 years, doesn't mean he's always right.
An anyone from the SBC/BBC area could have made the same mistake I did. Because that's what most GM SBC's look like.
-
Earl, you can restate your same comment all you want. But when most people say a GM/GENERAL MOTORS "big block V8" Everyone goes, GMC/CHEVY. The pontiac route is rarely gone over. So yeah, I'll accept I was wrong. But just because he's done motors for 10 years, doesn't mean he's always right.
An anyone from the SBC/BBC area could have made the same mistake I did. Because that's what most GM SBC's look like.
thats why I chose this motor. Super rare. Never been done, torque out of the ass, and the downward facing exhaust was Perfect for this car.
-
What size Pontiac motor is that?
Stock it was 400 ci or 6.6 liters
-
cant wait to see this running!
-
The car will wiegh probably less than 2000 when done
-
ok, sometime has gone by since my last update. alot of changes had been made. here are a few pics
Tube Chassis is done, motor is in, just finished all the wiring. Finally got my hand made rear end. Hopefully will have it mounted this weekend. its getting close.
-
Getting closer man! Keep up the amazing work!
-
Looks great Kyle! Chugging along...what are your plans for the interior?
https://www.instagram.com/_jdesigner_/ http://nevertoolow.tumblr.com/
🥳SOLD BMW E24 633CSI - BMW M30B32 🧪SOLD HCH ES9 - 1.3 LDA
👽BMW E30 325IC - Toyota 1JZ-GTE ⏰ HONDA EF9 CIVIC SI - JDM B18C5
☠️BMW E36 318i - Ford 5.0 FE302 🚴♂️ GT-Labomba - 26x2.75 Freeride
🤹♀️SOLD BMW E36/7 Z3 - BMW M54B25 🧓SOLD BMW E10 2002 - BMW M10M05 -
Two sparco seats, full carpet, back seats gone and all my electronics are in its place. Stock dash for now with digital dash in the stock location. Stock door cards.
-
Mad props man, mad props! This thing is gonna be immaculate by the time you're done.
-
i had a slight freak out saturday morning and wasnt happy the direction i was taking.....so i dismantled the whole front end again and started over on the engine bay. In the 16 hours i put in this weekend i am 1000% happier with the results so far. it will be on the next level where i felt i was rushing and slacking before.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login