my E30 story

[Brian.]

Honestly, if you wanted, you could be high speed and do something cool like this:

That's an E30 pictured. But ditch those stupid factory door pulls. I have some epic CNC machined 6061 aluminum handles I'd sell to you if you'd like!

[Rowleym]

I tore everything out of the interior except the front door cards. I will just be putting matts in and leaving door cards. enough for me! hopefully building some sort of custom dash.

[johnprusinski]

Brian said:

Honestly, if you wanted, you could be high speed and do something cool like this:

That's an E30 pictured. But ditch those stupid factory door pulls. I have some epic CNC machined 6061 aluminum handles I'd sell to you if you'd like!

thats what i was thinking too. just put a steel door panel. that doesnt look like a bad idea, now that i actually see what it looks like.

[Brian.]

^Custom dash is more work then you think.. Do a half dash. That's what the S-chassis guys do.

Couldn't find any good pictures, but this is what they look like:

[johnprusinski]

im trying to think if there is a way to get it to pop off and on easily, so i dont have to use rivets.

[Brian.]

This is my buddies Hachi drift car's door cards. These were more expensive. But they look awesome in person. I wish I could find a better picture. Vinny at Destruction Warehouse in Waukesha made them. Custom brushed stainless.

[Rowleym]

Brian said:

This is my buddies Hachi drift car's door cards. These were more expensive. But they look awesome in person. I wish I could find a better picture. Vinny at Destruction Warehouse in Waukesha made them. Custom brushed stainless.

thats beautiful. might need to do this.

[johnprusinski]

i think im going to buy some metal from work tomorrow. ill try one door and if i like it ill do the other one.

[Rowleym]

johnprusinski said:

i think im going to buy some metal from work tomorrow. ill try one door and if i like it ill do the other one. 

Make a cardboard cut out, and give it to me when you are done

[Rowleym]

http://www.trackhq.com/forums/f337/bmw-325i-e30-track-race-car-build-hx40-4719/

look at this guys center thing. I think that is what im going to make.

[Brian.]

Rowley, you're forgetting you drive a 4 door E30, not a 2 door.

[Rowleym]

Brian said:

Rowley, you're forgetting you drive a 4 door E30, not a 2 door.

yes? There is no difference.

[Rowleym]

nevermind. I see what you are saying. I thought you were talking about my center dash thing, Not the doors. Good point.

[johnprusinski]

ill see what i come up with tomorrow for the template.

[johnprusinski]

I got my spark plug wires today. The only problem is, that i don't know where which wire goes to which on the distributer cap.

[StewCrew]

johnprusinski said:

I got my spark plug wires today. The only problem is, that i don't know where which wire goes to which on the distributer cap.

Google the firing order. If I was at the shop I could tell you

[johnprusinski]

Searching right now.

[B C]

johnprusinski said:

I got my spark plug wires today. The only problem is, that i don't know where which wire goes to which on the distributer cap.

the firing order is 1-5-3-6-2-4 and the distributor rotor rotates clockwise. Cylinder 1 is nearest to the drive belts. If you aren't able to get the wires figured out between now and noon tomorrow I can take a picture/jot down what it is on my car.

[johnprusinski]

I still don't get it. Everything says the cap is numbered. I think I got the only one that does have numbers.

[B C]

The numbers would be here

________5__3_6__2

_________1__C_ 4__  

Based off the image with the cap numbers. I will make a guess and say the wires go in this order ^^^^ 

(Sorry if the formatting is screwed up and it doesnt make sense)