WIBIMMERS

I bled the cooling system after doing thermostat and it still gets more air in the system obviously leaking somewhere (most likely the HG) yes it has coolant in it and it's not low. Every so often I check it when I'm letting air out of the tank. Heater core could be clogged but that doesn't explain to me why I keep getting air in the system. The shop I took it to will diagnos it first before tearing it apart.

It overheats when it wants to. After a drive or during one it over heats and I shut it off immediately. Upon opening the hood I use a flat head and loosen the bleeder screw on the top of the coolant tank, when I do this sometimes a little air comes out sometimes a lot. I drive it everyday. I decided to take it to the shop notes above (thanks pat) and they're starting the work Monday 1/25/16. It's pricey but id like to be able to drive my car without having any thing to worry about again. Plus I don't have any heat coming out of my vents so it's a hassle driving to work in the morning. Once this problem is resolved I can start saving for the aftermarket parts that I want... Again I thank you all for your responses

Hello fellow wibmw owners. This is my first post and sadly it's me needing help, and a lot of it. Unfortunately my head gasket is junk on my 98 bmw 323is 2.5L i6 and it needs to be replaced asap. I havnt looked into a lot of shops because frankly I'm not sure I trust local shops with a bmw. I'd rather do it in someone's garage with someone who's done it before where I can help get the job done. I'd try and tackle it my self but I've never done a head gasket. Anywho reason for my post is I either need a really well know shop who has experience with e36 head gaskets or someone's help on here in doing the job. I don't have much money but will get a loan to get my beloved bimmer back up and functional.

thank you in advance for any replies and help. 

I was at the last wi bimmers meet this year as well had a great cruise with most of you.