M20 Turbo => M50 turbo fun.
-
A Manifold is one hell of a piece of work! Lots of crazy bends and such.
Not saying you.can't do it, just saying they are art!
Sent from the future. Or my phone, who knows.
-
GunMetalGrey said:
A Manifold is one hell of a piece of work! Lots of crazy bends and such.
Not saying you.can't do it, just saying they are art!
Sent from the future. Or my phone, who knows.
Yes they are.
Also, you know how to weld stuff to cast pieces right Rowley?
-
That's for a 4 cylinder son. UEL (Unequal length headers) are so chincy man. Go for equal length (or close) which means you're gunna have to add bends and wrap pipes around others. But it'll be worth it in the end, if done properly.
Also, the key to welding onto anything cast, is to heat it up, heat it up really good with a torch, then weld to it.
-
Well duh I can count cylinders man! But yea. Unequal length. Who cares. I'm more into transient response of a log type manifold. Keep the runners short as possible, and the flow decent. Good enough for me! And yes I've heated up cast for welding before.
sk8 or die
-
Rowleym said:
Well duh I can count cylinders man! But yea. Unequal length. Who cares. I'm more into transient response of a log type manifold. Keep the runners short as possible, and the flow decent. Good enough for me! And yes I've heated up cast for welding before.
word! I know what you're saying. as long as you keep the flow good, you should be golden.
-
or if you wanted you can just buy an M50 exhaust manifold flange, and weld to that, instead of a cast piece. It'd look 10x better, and would make welding alot less painful.
if you're going with a simple set up like this:
Weld a piece of metal rod from the Exhaust manifold to the turbo manifold, if you don't, over time the heat from the exhaust combined with the weight of the turbo/exhaust pipe pulling against it, will eventually crack it. Might as well save yourself the trouble.
Picture found.
Disregard his honda retardation.(the hole in the manifold) But the support bracket is shown.
This little bracket (I suggest you put in two for safety's sake) will be a life saver. If you don't, that shit can warp, and crack or worse yet, completely warp and droop touch something else in the engine bay, and catch your car on fire. (little extreme, but it can happen)
-
Is it bad that I am not even boosted yet and I am already planning out what to add after?
Sent from the future. Or my phone, who knows.
-
Ha, I am sitting here wanting to order all of the little bits but I know I need to order some of the bigger items first!
Sent from the future. Or my phone, who knows.
-
But I have saved almost enough to order the manifold, which is 520 bucks which took a bit and I keep almost buying the 20-100 dollar parts that won't take me long at all to save for.
Know what I mean?
Sent from the future. Or my phone, who knows.
-
GunMetalGrey said:
But I have saved almost enough to order the manifold, which is 520 bucks which took a bit and I keep almost buying the 20-100 dollar parts that won't take me long at all to save for.
Know what I mean?
Sent from the future. Or my phone, who knows.
Just keep saving man! Gotta get the manifold. What mani you going with?
I just need to learn how to do aluminum with tig! I can tig pretty well on everything but aluminum.
I just need the specs and then I can get it.Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login