E30 Suspension Guru's / Welders?
-
I picked up a set of German Engineering coilovers, which are much like the Ground Control "kit".
Does anyone have experience with shortening strut housings? Any good welders here?
I'm diving into this head first with no flipping clue as to what to do. From what I've read on r3vlimited, I don't HAVE to modify anything. But running shortened housings and shorter (iX) struts/shocks I'd be able to go lower...
-
alexw said:
I picked up a set of German Engineering coilovers, which are much like the Ground Control "kit".
Does anyone have experience with shortening strut housings? Any good welders here?
I'm diving into this head first with no flipping clue as to what to do. From what I've read on r3vlimited, I don't HAVE to modify anything. But running shortened housings and shorter (iX) struts/shocks I'd be able to go lower...
If you want to respect the roll centers of the car then I would suggest not slamming it. If you do, the springs and sway bars will need to be stiffer than they would normally need to be in order to keep body roll in control. I am going to go weigh my car again soon and calculate the roll-centers and try to determine exactly what is too low (at least for my car). At least with coilovers you have the option to slam it for looks then bring it to a more proper height for performance sake
-
i can probably give you a hand with the lowz
-
I should have clarified, I'm not looking for a slammed look.
This guy on R3v has pretty much the setup I'd like:
thebutcher37 said:
Finally posting.
- Car is 1991 318is m42 motor
- GE coils 450f 6"/650r 4.5"
- I.E. Race front camber plates
- Bilstein sport strut/shock
- Rolled/pulled fenders
- on 16x9 wheels et10
- Front is all the way down
- Currently need to lower the rear a bit more
P.S.
Sig below: wheels are poked with 20mm spacers. making wheels et -10 and rear is lower about an inch.
He didn't modify anything besides cutting the spring perches. I'm not sure that I have bilsteins sports though. I have to look. The other option is chop 2 inches off of the strut housings and run iX bilsteins which a member has for sale here...
-
wish i had a welder, i'd do it for ya.
if you need a shop
milwaukee: pat kummrow @ kummrow automotive
kenosha: steve tredup @ autosport (if he does fab, not sure)
Dan
-
I don't know that I want to waste money on having a shop do it. Maybe I'll have them modify the strut housings but nothing else.
The guy who's car I posted, said all he did was cut off the spring perches, he's still running stock (well bilstein sport) struts and shocks.
I'm not sure what I have for suspension right now, but it's definitely stock or oem replacement. I'm not looking to spend a ton.
FullBannana has iX strut/shocks for me, but I'd have to do the cutting....
Idk....
-
And my 318... An 88 that I got for $400
They both had euro weaves mounted at one point, I never really kept up with the mod list on these cars. We maintained them to some extent and then they both crapped out on us and were junked because we couldn't sell them before we left. Inspections were required prior to a sale of a car, so it was really a pain in the ass for sellers of subpar cars... No "as is" sales without a lot of BS to wade through.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login